|
|
Shop by Category:
|
|
|
|
Product Specifications
|
|
Part #:
P4243ME
|
|
Manufacturer:
Intermatic
|
|
|
|
Back to Top
|
|
Product Description
|
Untitled Document
Pump/Valve Actuator Mechanism
This electronic control mechanism, especially designed for pool/spa combinations,
will snap into most
Intermatic panels and enclosures in use today. Designed as a very versatile, user-friendly
device, it can be
combined with a number of different Intermatic controls in order to facilitate
a variety of custom applications.
This mechanism can handle two motor loads, up to 3 HP, switch up to 3 valve actuators,
the heater
thermostats and also allow the user to select pool and spa heater operation.
The control options are numerous. For example, the Pool-to-Spa operation can be
activated three different
ways. By a remote installed count down timer, a radio receiver or a simple toggle
switch. In the pool mode,
any new or existing timer or manual switch may be used to control the filter pump
operation. In the Spa mode,
the filter pump and an additional piece of equipment can be controlled by a wired
remote on the spa side
(133PE1484A), by wireless remote, or by the buttons provided on the face of the
mechanism.
If combined with the P1353ME Digital Pool/Spa mechanism, the two units can handle
all the equipment
variations of a pool/spa combination, including two-speed filter pump, cleaner
pump, up to three 24 volt valve
actuators, two stage protected heater, jet pump, blower and lights.
Applications:
• Pool/Spa Combinations
• Filter Pump
• Blower
• Jets
• Pool & Spa Lighting
• Landscape Lighting
• Water Feature
Specifications:
• Input Voltage – 120 Volt or 208-240 Volt, 50/60 Hz.
• Switch Rating (each circuit) – 17 Amp resistive 120-240V, 10 Amp
Tungsten – 120V, 1.5 HP – 120V, 3 HP
• 240V, 60Hz
• Number of Circuits – Up to two DPST 3HP circuits
• Shipping Weight – 5 lbs (2.2 kg)
|
|
|
|
Back to Top
|
|
|