How to Install AquaSonic Underwater Speaker Screen

WRITTEN BY: 

  4.75 out of 5 stars on 4 ratings
(Click on a star to add your rating)

This is a guide to install an AquaSonic Under water speaker screen onto a Pentair face ring

Step by Step

Top

Step 1

Carefully remove the rubber ring from the face ring screw. Save the rubber ring.

Step 2

Remove the screw from the face ring. Save the screw.

Step 3

Put on a pair of work gloves to avoid being cut by the screen's sharp edges.

Step 4

Place the bottom of the screen into the face ring aligning the feet around the tab. Note that the smooth beveled side of the screen should face outward toward the front of the face ring.

Step 5

Push the screen all the way into the face ring. You may need to flex the screen in a little to ensure a secure fit.

Step 6

Insert the screw through the face ring. There is a small hole cut out for the screw in the screen.

Step 7

Carefully place the rubber ring onto the face ring screw.

Comments

Top
(1 to 2 of 2)

InyoPools Product Specialist  Posted: 7/18/2013 

filter cartridge - Please give our Customer Service Reps a call at (877) 372-6038. They will be happy to help you select a robotic 9" filter cartridge.
 Reply

Anonymous  Posted: 7/17/2013 

HELP ME BUY ROBOTIC 9 INCH FILTER CARTRIDGE
 Reply