If your Maytronics Dolphin Nautilus Robotic Cleaner is not picking up the dirt and debris as effectively as it used to, it may be time to replace the Cleaner's Brushes. This cleaner has the option of using a Combined Brush with Climbing Rings incorporated into the ends of the brush to help climb the wall. If your Cleaner is not climbing the walls, it may be time to replace these rings with the brushes. This guide shows you how to replace the Nautilus Brushes and Climbing Rings.
Keith Parower Posted: 8/6/2020
how do i remove the sides to replace the wall climber?Reply
InyoPools Product Specialist Matt S. Posted: 9/1/2020
There are a set of screws you have to remove the bottom lid to gain access to. When you flip the cleaner to take out the bottom lid, you should be able to see two screws flanking the motor base.Reply
CARMEL ATTARD Posted: 4/4/2020
My Dolphin is an M200, would these instructions work for it as well?Reply
InyoPools Product Specialist Matt S. Posted: 4/7/2020
Yes, it would be a similar process.Reply
SHARI DRENNEN Posted: 6/11/2019
My Dolphin is an Apollo, would these instructions work for it as well? It is yellow and I have had it since 2015.Reply
InyoPools Product Specialist Matt S. Posted: 6/14/2019
Yes, this guide also applies to the Dolphin Apollo.Reply