$37.07

Qty:

By Pureline


Details

Top

Part # GOKIT2SALT

Alternate Part #'s PL1082, AEQGOKIT2V, APCK1013A

Product Description

Hayward Super II Pump Seal Kit

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • All Hayward Super Pumps 1/2 HP - 3 HP single and dual speed models.
  • All Hayward SP3000 Series Pumps
  • Works on both standard efficiency and energy efficient Hayward Super 2 pumps
  • Note: Hayward Super II Pumps use GOKIT2

Tune Up Kit Includes:

  • Motor Shaft Seal For Saltwater Pools
  • Diffuser Gasket
  • Pump Lid O-Ring
  • Housing Gasket
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 4/25/2016by Gregg

what surface(s) should the lube be applied with this seal kit??
 Reply

A  Answered on 4/25/2016 by InyoPools Product Specialist Hector F.

Lube can be used on all seals and gaskets besides the shaft seal.
 Reply


?     Asked on 7/21/2016by Mike

What is the difference between GOKIT2 & GOKIT@SALT?
 Reply

A  Answered on 7/23/2016 by InyoPools Product Specialist Alan M.

The GOKIT2SALT has higher quality seals and gaskets that stand up better in salt water pools.
 Reply


?     Asked on 8/11/2016by Jimmy

Not real clear, I have a salt system and a Super II. Do I need the GOKIT2 or the GOKIT2SALT?
 Reply

A  Answered on 8/11/2016 by InyoPools Product Specialist Scott W.

If you have a salt system you will want to go with the gokit2salt. The shaft seal in that kit is more heavy duty and less corrosive.
 Reply


?     Asked on 4/16/2018by Inyo Visitor

i have a sp2607x10 which kit do i need?
 Reply

A  Answered on 4/16/2018 by InyoPools Product Specialist Hector F.

This pump model uses the GOKIT3 for a standard chlorine pool and the GOKIT3SALT for the saltwater version. 
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Pliers, Socket Set, Wrench Set

Seal leak shorted out the motor

Written on 8/26/2019 by Guest

Followed the steps shown in the INYO online video.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

0     1

Bad seals ruined pump

Written on 10/7/2018 by Guest

Followed the inyo pool and it was so easy and clear! Don’t forget to put all parts on a mat so that you can do a 1 for 1 replacement and not forget anything.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.89  out of 5 stars)
27 Rating
5 star:
 
(25)
4 star:
 
(1)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews