Product Description

Thermostat Single pole rated at 25 amps with max temp rating at 110°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace the bad thermostat with a new one. ADDITIONAL PRODUCT SPECIFICATIONS: CAPILLARY MEASURES 18" (EXCLUDING BULB), BULB DIAMETER IS 5/16" BULB LENGTH IS 3".  2 CONTACTS WHICH MEASURE .250 MOUNTING HOLES ARE 1 5/16" APART ON CENTER LINE MAXIMUM HEAT 110 F CAPILLARY ON THIS THERMOSTAT IS PLASTIC COATED USE COPPER CONDUCTORS ONLY

Review Summary