$5.14

Qty:

By Aladdin


Details

Top

Part # 630

Dimensions 4.75" L x 1.5" W x 1" D

Alternate Part #'s 34725-0013, SPX32712, 88-423-1000, AEQ630, ALD630, APC630

Product Description

Designed by leading o-ring and gasket manufacturer Aladdin, Magic Lube was created as an alternative to petroleum based lubricants that corrode rubber and cause leakage.  Magic Lube is Teflon based and safe for use on most rubbers, plastics and metals.  

Need a larger size?  Get the 4 ox tube here!  The silicone lubricant version is here

  • Safe Teflon based lube and sealant
  • Long-lasting adhesive film prevents contact
  • Used in wet and dry applications
  • Withstands temperatures -10° to 425°F
  • Will not melt
  • Non-volatile
  • Waterproof
  • USDA H-1 rated for environmental safety

Strongly recommended for all pump and filter o-rings.

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 7/5/2015by BillH

Is this OK for the chlorinator lid o-ring, or should I stick with silicone? Thanks.
 Reply

A  Answered on 7/5/2015 by InyoPools Product Specialist Patrick P.

Hi Bill, this teflon based lubricant would be perfectly fine for your chlorinator lid o-ring.
 Reply


?     Asked on 6/14/2016by Doug

I just placed an order for some O-rings and forgot the lube would it be possible to add a tube of Magic lube to the order #673751?
 Reply

A  Answered on 6/15/2016 by InyoPools Product Specialist Matt S.

Doug, you would have to purchase the lube separately, or you can buy it locally at a hardware store.
 Reply


?     Asked on 5/3/2017by robert lake

Does magic lube eventually dry like silicone ?
 Reply

A  Answered on 5/3/2017 by InyoPools Product Specialist Lennox H.

Hi, Robert. The Magic does not dry like actual silicone.
 Reply


?     Asked on 6/23/2017by Mikegyver

I plan to use this Magic Lube #630 on my Polyurethane bushings on my truck but I cannot find information anywhere that would tell me that this lube is safe with polyurethanes. I've even looked on safety data sheets (even here) and all it says it that it is safe with MOST rubbers. Can anyone tell me if this Magic Lube #630 is safe to use on Polyurethane bushings? If so, can you please let me know where to look up this info so I can see it firsthand? That would be most appreciated! Thanks
 Reply

A  Answered on 6/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Mikegyver. Unfortunately, I was not able to find any info confirming that the Magic Lube lubricant can be used on polyurethane bushing. You may want to contact Aladdin at 1.800.854.2466.
 Reply


Top
Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

Screwdriver, Socket Set

Bad pump

Written on 10/25/2024 by Guest

Pulled pump apart and went to put back together and the lube provided to put back together included silicone and FPTE. The pump specifically says “never” use silicone or FTPE on the pump that will result in early failure. Thanks for nothing!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Nut Drivers, Socket Set

0     1

Motor no longer working with a Jandy pump

Written on 3/22/2024 by Guest

Stripped pump, impeller and motor and reinstalled using Magic Lube on all seals. Worked like a charm.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

1     0

Pump leak and air in the system

Written on 8/9/2023 by Guest

I had to replace the seals in my pump, therefore ordered the GOKIT38 and this Magic Lube to fix this big problem.
The Magic Lube was amazing, I applied it generously to every seal, achieving a successful repair.
It is a high-quality product at a very affordable price, surely this repair will last a long time!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set

0     1

New pump install

Written on 7/29/2022 by Guest

Use recommended lube on all rubber gaskets for water tight seal

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set, Wrench Set

1     0

Return header cracked

Written on 1/10/2022 by Guest

Replaced header, used lube on all 9 gaskets, no leaks, checks good under 20 psi water pressure

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     1

I was getting air in the system and had to use hose to prime pump on occasion in order to get pump going.

Written on 4/15/2021 by Guest

I use Magic Lube on all o-rings and seals. I usually clean/lube seals and rings in beginning of season and have no issues all year long! Magic Lube is the best! Thanks

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Not a problem

Written on 8/28/2020 by Guest

Since I have a new pool, several items needed to be purchased to do proper maintenance of the pool. I know that many people use Vaseline to lubricate O rings on the pump. Problem is that even though it will work for a short period of time, why not spend a small amount of money for some Teflon grease and the rings will last longer. Use Teflon grease for any O ring on your equipment
1.Remove cover of pool pump.
2. Carefully remove O ring.
3. Inspect O ring for any cracks, damage, etc.
3. Clean O ring if undamaged
4. Lubricate O ring with Teflon grease ( doesn't have to be a lot).
5. Set O ring aside and finish maintenance of pump.
6. Carefully put cover back on pool pump.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     1

Pump was leaking around gaskets

Written on 4/29/2020 by Guest

Used this to help seal - done no more leaks

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Needed lubricant

Written on 4/15/2020 by Guest

Ordered it on line with no problems. Description of the products was helpful

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Needed lubricant

Written on 4/15/2020 by Guest

Ordered it on line with no problems. Description of the products was helpful

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Wrench Set

1     0

Leaking O ring

Written on 3/19/2020 by Sammie

Ordered O ring AND lube.
SEPARATED tank body and seal plate cleaned using Magic Lube.
Reassembled and tested,

Problem solved

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Wrench Set

2     0

Gaskets and Seals on Cartridge Filter Don't Sit Right

Written on 5/30/2019 by Guest

Clean gaskets and seals thoroughly then apply light coat of lube. Now the seals glide and don't bind up creating a good seal and no more leaks.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     0

Disassembled Pump and Motor. Needed Lubricant Before Reassembly

Written on 5/27/2019 by Guest

It's the beginning of pool season in central Florida. I disassembled my motor from the pump housing after seeing a leak, noticed the condition of the seals and pump parts, ordered parts from Inyopools.com that I needed after reviewing their How to Videos (Matt & Rob) and detailed illustrations on my pump and Motor. I lubricated and replaced the the seals and other parts and it's working great. I had seen other online videos about pool lubricants and many people were not using the correct lube. Not only will it make the pool pump work properly but the seals will also last longer.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

1     0

Normal Maintenace

Written on 12/30/2018 by Guest

Great product!! Lubed seals, valves, etc.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

I used my finger tips

3     2

Filter o-ring placement

Written on 8/7/2018 by Guest

Simple process. Squeezed a few dots of silicone lube on the oring and used my finger tips to place a thin coat of lube before inserting the gasket. JOB DONE!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

I used my finger tips

1     0

Filter o-ring placement

Written on 8/7/2018 by Guest

Simple process. Squeezed a few dots of silicone lube on the oring and used my finger tips to place a thin coat of lube before inserting the gasket. JOB DONE!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     0

My Predator Pool filter began began to leak around the filter body gasket

Written on 4/29/2017 by Guest

1. I closed the valves for the inlet and outlet of the filter.
2. Drained the water to below the cover joint.
3. Removed the closure ring and the cover and then removed the existing o-ring.
3. I ordered a new O- ring gasket for body/top joint.
4. It was recommended that I coat the new O - Ring with the Magic Lube O-Ring Lubricant 5. I coated the O - Ring and reinstalled it and the cover on the filter.
6. Refilled the filter allowing the air to vent and opened the inlet and outlet valves.

The project was successful

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.79  out of 5 stars)
84 Rating
5 star:
 
(72)
4 star:
 
(8)
3 star:
 
(3)
2 star:
 
(0)
1 star:
 
(1)

The Most Recent Reviews