$45.72

Qty:

Details

Top

Part # 57-110-1272

Manufacturer Code 614516

Dimensions 7-1/2 OD X 6-3/4 ID X 7/16 thick

Alternate Part #'s PAC-301-3155, PEN614516

Product Description

Lens Gasket Hatteras, Large - 614516

Top

?     Asked on 6/27/2019by Ken Hubbard

Have a PAC FAB label on my pool light housing. Model 60-XX5X Fixture housing 62-XXXX. I noticed you said this was a Hatteras. So is Part # 57-110-1272 the correct gasket for my lens?
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Megan C.

Yes, that would be correct.
 Reply

  • Commented on 4/13/2020 by Product Owner

    I need a replacement lens gasket for my Pac Fab inground niche light; housing shell has this on the label...60XX5X, and 61-8230, and says up to 500 watts. The existing gasket is blue in color and is about 7.5 inches inside diameter. Do you have a comparable replacement part? Thanks, Matt 513 576 9766
     Reply


?     Asked on 8/2/2019by Joe

Looking for a replacement gasket for my pool light. The pool was built in 1995. It's a Pac-Fab Light and the Mod. # is hard to read but looks like 63-xx5x or 68-xx5x. Is this the right gasket?.
 Reply

A  Answered on 8/2/2019 by Industry Professional

We are sorry but we are not able to I.D. either model # or anything close to them. We can tell you that the 57-110-1272 measures at 6-3/4" I.D. x 7-1/2" O.D.
 Reply


?     Asked on 1/23/2020by Kevin

I have an old spa light Pac-fab #65-0012 that uses a lens gasket the is 3-7/8 inches in diameter. Do you have a gasket that will fit?

 Reply

A  Answered on 1/23/2020 by InyoPools Product Specialist Lennox H.

Hi, Kevin. The Hatteras/Hatteras II Spa Lens Gasket - G-414 is the correct size for your fixture. 
 Reply


?     Asked on 2/3/2020by Mark Ayash

I replaced my gasket last year ( didn't buy from from here ) and it's still seeping. I am pretty sure it's the right part except it was a pentair 614516. Is there a way to help it seal? The gasket seal does feel rough
 Reply

A  Answered on 2/4/2020 by InyoPools Product Specialist Lennox H.

Hi, Mark. I would recommend replacing the gasket and make sure that the clamp ring is secured. 
 Reply


?     Asked on 6/24/2020by Bill M

Hello! I am attempting to fix my Hatteras pool light and I am confused about which gasket to order. I already removed to log gasket and I’ll include a photo of it. I’m hoping that this is the correct gasket. Thank you so much for your help!!

 Reply

A  Answered on 11/11/2020 by InyoPools Product Specialist Hector F.

Hi Bill, this is the correct gasket for the Pac Fab Hatteras pool light. 
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)