Part # 27-102-1126
Manufacturer Code G-416
Diverter Gasket, Generic 1-1/2" - G-416
This 5-spoke valve diverter (spider) gasket is a replacement part for several valves including Pentair / Praher 1.5" TM12 and SM10, Sta-Rite SideMount 1.5", Poolco Multiport, Speck 1.5" Top Mount, and Baker Hydro Side Mount Multiport. Other related valves can be seen under the tab above labeled "Parts".
USED ON PAC FAB, PRAHER 1-1/2" VALVES 5 SPOKE GASKET
OUTSIDE DIAMETER: 5-3/16" CENTER HOLE
INSIDE DIAMETER: 3/4"
THICKNESS: 1/4" (TOP TO BOTTOM)
SPOKE THICKNESS: 3/16" (SIDE TO SIDE)
OUTSIDE RING THICKNESS: 3/16" (SIDE TO SIDE)
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
1 to 2 hrs
Screwdriver, Pliers, Wrench Set
Search, find, and watch youtube videos on replacing diverter gaskets for your multi-valve.
Remove the top of the multivalve.
Remove the old gasket.
Make sure to get all of it out, use a small screwdriver. Hardest part.
Do not scar the gasket placement grooves.
Using a little weather stripping glue, replace it with the new gasket.
Inspect multi-valve, clean with a hose.
After the glue is set, replace the multivalue selector.
Test, check for leaks to the waste side.
The Most Recent Reviews
(5 out of 5 stars) Working Perfectly
Reviewed By: Inyo Customer ()
Replaced a leaky gasket and after cleaning old one off and wiping clean using a cement it fit right into the channels and working perfectly.
Was this review helpful to you?