By Custom Molded Products
Part # 34-605-1025
Manufacturer Code 27210-080-000
This is the Ninja whirlpool bath pump from CMP. Used by many tub makers over the years. 115v, 7.2 Amps, comes with air switch and 36" Nema cord. Also available in other amperages.
| Length | Width | Discharge Height | Overall Height |
| 13.64" | 5.35" | 6.75" | 7.28" |
| Manufacturer | Custom Molded Products |
| Pump Model | Ninja |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115v |
| Drain Plug Location | None |
| Suction Style | Bottom |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Center |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Motor Amperage/Wattage | 7.2A |
Will this pump replace a Clarke WPP1500A on an Eljer indoor whirlpool unit, as in drop in replace, without replumbing anything?? Thx
Reply
The alignment for plumbing will be good. All the other specs look good.
Reply
