$25.74

Qty:

By Pureline


Details

Top

Part # GOKIT64

Alternate Part #'s AEQGOKIT64, ALDGO-KIT64, APCK1062

Product Description

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • All Jacuzzi Cygnet Pumps 1/2 HP - 3 HP single and dual speed models.

Tune Up Kit Includes:

  • Motor Shaft Seal/Generic -Pump Seal 200 (psr 200) 5/8" (Used on Pumps Manufactured after 11/2002)
  • Case O-Ring - 5063-49 MANUFACTURER CODE 361 O-ring, 6" Id X 3 /16 Thick (361)
  • Pump Lid O-Ring - Strainer Cover - 47035241
  • O-Ring- Drain Plug O-ring Od 11/16" (112) Qty. of 2
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 1/19/2017by MIKE FISHER

WILL THE JACUZZI CYGNET TUNE UP KIT WORK ON A N A.O.SMITH MODEL NUMBERC48K2PA105C5 TYPE USQ 1102 1 HP
 Reply

A  Answered on 1/19/2017 by InyoPools Product Specialist Adam Y.

Good morning Mike, The seal kits are made for the pump if you have a Jacuzzi Cygnet then yes. Just matters about the pump not the motor.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews