$30.89

Qty:

By Pureline


Details

Top

Part # GOKIT14

Alternate Part #'s 65014, GO KIT 14, PL1014, 90-423-3014, ALDGO-KIT14, APCK1007, INYGOKIT14

Product Description

Jacuzzi (Carvin) Magnum Pool Pump Seal Kit

Standard tune up kit for the Jacuzzi Magnum pump includes the shaft seal and all o-rings, gaskets and lubricant.

We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor.  If you use your old shaft seal, it will not mate up properly with the new motor and may leak.

This Tune Up Kit Works on These Pumps:

  • All Jacuzzi Magnum Pumps 1/2 HP - 3 HP single and dual speed models, including Magnum Plus and Magnum Force.

Tune Up Kit Includes:

  • Motor Shaft Seal
  • Case O-Ring
  • Plug O-Ring
  • Strainer O-Ring After 7/89
  • Diffuser Square O-Ring
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 5/16/2015by Inyo Visitor

Will this work for a 1.5 hp magnum force with an AO smith motor?
 Reply

A  Answered on 5/16/2015 by InyoPools Product Specialist Patrick P.

Yes this would be the correct tune up kit for a Jacuzzi Magnum Force with AO Smith Motor.
 Reply


?     Asked on 8/13/2015by fallmd

Strainer or box of jacuzzi magnum plus has a slight crack,and water spurts out.What glue can be used to plug it?
 Reply

A  Answered on 8/13/2015 by InyoPools Product Specialist Robert M.

We do not recommend trying to repair the crack with any type of glue. We recommend replacing the entire housing. Part number 42234506K (5064-052) is the correct replacement housing.
 Reply


?     Asked on 6/2/2016by Mark

I have a leak between what I would call the motor and the skimmer basket. It is not the outer plastic ring. I was wondering if this was what I should use to try to fix the leak? Also, how hard should it be to pull the 2 pieces apart?
 Reply

A  Answered on 6/3/2016 by InyoPools Product Specialist Scott W.

That's where I would start at if there isn't anywhere on your pump housing that's leaking water or cracked. If you haven't changed the seals for a while they that would be a great place to start.
 Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench

My Carvin Magnaforce pool pump motor (14 yr old) shorted out - required replaceement

Written on 8/4/2021 by Guest

Ordered new replacement motor and the pump seal kit. Using the kit supplied seals and gaskets I replaced all parts during the pump motor replacement. This ensured that upon completion I experienced no leaks or problems. The pump has been running for two weeks without incident or leaks.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench

Replace pool pump motor and install new gaskets

Written on 8/31/2019 by Rob T.

Replaced pool pump motor and installed new gaskets. The gaskets came in a kit that must be applicable to several different motors and pumps. No instructions to assist in identifying where to place these gaskets nor which gaskets applied to a Magnum Force pump. Some gaskets intended for the diffuser assembly and at least one appeared to require being placed inside the pool pump housing. Very confusing.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.63  out of 5 stars)
27 Rating
5 star:
 
(20)
4 star:
 
(6)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Recent Reviews