$37.26

Qty:

By Pureline


Details

Top

Part # GOKIT74

Alternate Part #'s PL1074, AEQGOKIT74, ALDGO-KIT74, APCK1180

Product Description

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • Hayward PowerFlo Matrix

Tune Up Kit Includes:

  • Shaft Seal
  • Strainer O-Ring
  • Lid O-Ring
  • Coupling Nut O-Ring
  • Body O-Ring
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 9/12/2016by john

will this kit work for a 1.5hp power flo matrix pump and do you give a military discount thanks john
 Reply

A  Answered on 9/14/2016 by InyoPools Product Specialist Stacey M.

Hello John, all the orings/seals for Hayward Matrix Pump are separate, please click here on what you need. There is a military coupon, code is BEBCJHAZS.
 Reply


?     Asked on 4/22/2019by karen

where can i get a label for the pump showing me where filter/backwash etc is? This is for the Hayward Power-Flo Matrix
 Reply

A  Answered on 4/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Karen. What you need is for the filter valve, which we will need to know the model or series number in order to get you the requested info.
 Reply


?     Asked on 9/22/2019by Donald Carpenter

Is the shaft seal in GOKIT74 recommended for salt water pools?
 Reply

A  Answered on 9/23/2019 by InyoPools Product Specialist Michelle B.

Hello, If you have a salt water pool, we recommend getting the heavy duty shaft seal. http://www.inyopools.com/Products/07501352048632.htm
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

changed out bad motor and installed new seal and o-rings

Written on 1/5/2024 by Guest

After watching the very informative INYO videos, i ordered the new motor and seal/o-ring kit as suggested. I popped out the old seal and pressed the new one in place. I changed the old o-rings on the pump housing and lubricated with the enclosed silicone lubricant. Very easy job.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

3     0

Leaking water

Written on 5/21/2018 by Guest

We took pump apart and re installed seals and put pump back together. Leak stopped

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews