$26.52

Qty:

By Aladdin


Details

Top

Part # GOKIT12

Alternate Part #'s PL1012, APCK1004

Product Description

Standard tune up kit for the Hayward Power-Flo pump includes the shaft seal and all o-rings, gaskets and lubricant.

We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor.  If you use your old shaft seal, it will not mate up properly with the new motor and may leak.

This Tune Up Kit Works on These Pumps:

  • All Hayward Power Flo LX Series Pumps 1/2 HP - 2 HP single and dual speed models.
  • All Hayward Power Flo UN Series Pumps 1/2 HP - 2 HP single and dual speed models.
  • All Hayward Power Flo 1500 Series Pumps 1/2 HP - 2 HP single and dual speed models.
  • Note: Hayward Power Flo II, and Hayward Power Flo 1700 Series Pumps use GOKIT13

Tune Up Kit Includes:

  • Motor Shaft Seal
  • Seal Housing
  • Housing Gasket
  • Strainer Cover O-Ring
  • Strainer Cover O-Ring (Clear)
  • Strainer O-Ring
  • Housing O-Ring
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 12/30/2015by Inyo Visitor

I have an InTex above ground pool, with a Hayward Sand Filter (Model# VL40T32; Serial# 2112111100567301). The pump started leaking, will this kit work on my filter?
 Reply

A  Answered on 12/31/2015 by InyoPools Product Specialist Lennox H.

Hi, The Hayward Pump Shaft Seal Kit (VLX4008) will be the correct kit for that pump.
 Reply


?     Asked on 5/1/2016by Dennis

Does this fit RS 1500
 Reply

A  Answered on 5/2/2016 by InyoPools Product Specialist Andy O.

Dennis, The Gokit12 Tune Up Kit Power-Flo 1500 Series will not fit the RS1500. The correct seal kit is Gokit2 Tune Up Kit Hayward Super II.
 Reply


?     Asked on 5/14/2016by Inyo Visitor

Does this kit fit HAYWARD perflex EC40 flow pump?
 Reply

A  Answered on 5/15/2016 by InyoPools Product Specialist Matt S.

The Hayward EC40 is a DE filter, this kit is for the pump that feeds the filter. Do you know the make and model of your pump's housing?
 Reply


Top

Review Summary

 (Average 4.72  out of 5 stars)
7 Rating
5 star:
 
(5)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews