Part # GOKIT3
Standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For more Pool Pump Motors
Click here for Saltwater Pool Tune Up Kit (GOKIT3SALT)
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Will the GoKit3 work with saltwater pools?
Reply
The Tune Up Kit Hayward Super Pump for saltwater pool is GOKIT3SALT.
Reply
I have a model C48K2n143B1
SP-1607-Z1-M
Which seal kit do I need?
Reply
1 to 2 hrs
Nut Drivers, Socket Set, Magic Lube
1 0
First off, the instructional video's on your site are invaluable! I used this kit with a new century pump I purchased from INYO. As long as you follow the steps in the video, you can't go wrong. Be sure to use the supplied lube ( I always have a tube of Magic Lube around for back up),
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I bought this kit to fix my pump. I also bought a new motor. Inyo's YouTube has some great videos on how to do the repair. It was relatively easy. I didn't need a new pump, just the motor, but while everything was apart it was time to upgrade the rest of the elements. Turn off the electricity, disconnect the wiring, remove the bolts holding the motor to the pump housing, replace the parts and reassemble. This was the first time I've done this and the whole thing took about 2 hours.
Less than 1 hr
Socket Set
2 0
Disconnected the pump and replacement the rings. It was self explanatory and everything fit exactly where the old ones came off. The lubricant supplied with the kit was enough to use for the entire kit. Inyoupools has youtube videos or videos right on their website to help walk you through step by step.
Less than 1 hr
Screwdriver, Just to get the old seals out
3 0
We replaced the motor, but didn’t have to replace the debris basket. However, at the suggestion of a product specialist, we did go ahead and replace the seals on anything adjacent to the new motor. We are glad we did! The parts arrived as described and fit well.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set, Adjustable Wrench
2 0
Shut off power remove plastic cover take four bolts off place hex wrench to hold shaft remove impeller remove shaft seals Used small screwdriver to push washer part of seal clean with dry rag lube using glove place parts back together change out gaskets reassemble and reconnect. Prime pump with water in screen side Turn on pump-no leaks Watched an old U tube video before starting Done in less than hour!
1 to 2 hrs
Nut Drivers, Pliers, Wrench Set, Bearing puller. Multimeter to check motor.
4 0
Replaced bearings, seals and capacitor. I got a 1hp Superpump for free that was thought to be junk. The main issue was very bad bearings especially the front one likely due to an old shaft seal. Because of this the capacitor blow out also. Total repair time was about an hour and cost was $70. Now a have a perfectly running spare with my current pump ~10 years old and getting a little load.
1. Had the necessary, basic hand tools and bearing puller (if you don’t, HF has them cheap an auto parts store will loan them).
2. Disassemble per the Inyopools video. These are pretty standard motors so not hard to figure out.
3. Cleaned and check motor with multimeter, pressed new bearings on.
4. Re-assembled motor per the video.
5. Replaced all the seals. Save the water slinger because that won’t be in the kit.
6. Checked adjustment on v-switch. This is important on the older motors. Inyopool has a video on this too.
7. Replaced start capacitor.
8. Successful test and high-5’s all around.
Less than 1 hr
Screwdriver, Nut Drivers, Wrench Set, Tongue and groove pliers
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
2 0
Less than 1 hr
Screwdriver, Socket Set
2 0
Less than 1 hr
Screwdriver
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I replaced my pool motor and INYO recommended this Tune Up kit to replace the seals in the pump. The kit had everything I needed including a small tube of silicon lubricant. All parts were exact replacement and fit perfectly. You simply remove the old gaskets and follow the written instructions and or watch the many videos that INYO Pools makes for your viewing and then ease of performing the job, without having any experience. This was easier than I had anticipated. One thing that was a easy but a little tricky is the shaft bearing is in two halves and they have ceramic faces that must mate. One half is white ceramic and that is easy to see and is well described and highlighted in the videos, but like a lot of things when you're looking at the parts it's not black and white 100% which side of the black ceramic 2nd half of the shaft bearing is the shiny side. You don't want to touch the ceramic surface as the oil from your fingers might cause the bearing to burn... after inspecting closely I was able to figure it out.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
Remove 4 exterior Motor to pump bolts
Remove next 4 bolts on bezel
Loosen rear metal cover screws
Remove impeller by securing the driveshaft nut and turning the impeller
Remove next two covers attached to motor
Turn off breakers
Remove electrical
Replace gaskets, seals and impeller spring
Reassemble in reverse with new motor
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
1. Opened pre-pump strainer basket, and replaced rubber seal in housing top (after lubricating with kit-supplied lube);
2. The following were all replaced after the motor/pump assembly had been removed from the pump housing, and disassembled, per instructional video available online (after being lubricated, of course!):
- Pump diffuser seal;
- Impeller housing-to-motor mount seal;
- Shaft seals in housings (2).
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
2 0
1. removed old motor from pump housing
2. bolted on new motor to pump housing, as well as replacing old seals with new ones
3. attached impeller and diffuser to motor/pump housing
4. attached new motor/pump housing to filter.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
2 0
Ordered a new motor from INYO pools. I flt I should get the tune up kit to install it. It was a wise choice as it comes with all the seals needed to replace the motor Installation went smooth.
First took the pump off the filter base. then you separate the motor from the basket. Then remove the impeller and spring bushing. Replace the seal to the basket. The impeller was also worn so I replaced it as well. The motor shaft has a flat section the wold the shaft while you replace the impeller. Reassemble the pump section, note where it is marked top. Put the assembled back on the base. Prime the pump then start it up.
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
4 0
Pulled everything apart, the seal would not seat. I cracked it. Watched INYO video on replacing pump seals, learned error of my ways, ordered new seal, pump up and running. When am I ever gonna learn??????
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
4 0
1 to 2 hrs
Pliers, Socket Set, Wrench Set
2 0
1 to 2 hrs
Screwdriver, Pliers, Open end wrench
3 0
First I turned off the breaker to remove power. Then I removed the wires from the pump and removed the 4 bolts. That let me take the pump from the front end where the basket and plumbing is connected.
I brought the pump to the workbench and removed the impeller by placing a wrench on the rear of the shaft and turned the impeller until it loosened up enough to remove it. After removal I cleaned up the shaft and removed the seal with a rubber mallet and screwdriver.
My pump was leaking for quite sometime so I had to remove some rust from the underside of the pump and used spray paint to give it some protection. I installed the new seal with care not to touch the ceramic pieces. Next I put the impeller back on the shaft and put the front end which snapped back on.
I then returned to my pump location and fastened the pump back with the bolts I removed. I reconnected the electrical, turned the breaker back on and filled the basket area with water to start the siphon. Within minutes the pump was back working again. This process took me about an hour. My pump is under a deck so it took a little longer to get to it.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
We diagnosed that it must be the motor as, the pump would pump but then trip the circuit breaker. I talked with helpful sales people on the phone and ordered a replacement motor for the Haywood Super Pump. My only mistake was not mentioning that we have a salt water generator and we should have ordered the heavier duty shaft seal, but lessons learned.
Less than 1 hr
None
2 0
Less than 1 hr
None
3 1
There isn’t much step by step to give on this item. I replaced the seals one by one as I disassembled the old motor and put the stuff on the new motor. The gasket for the pump lid was very easy to put on as well as the other ones. The only one I had an issue putting in was at the back of the pump that connected the motor to the pump because it would want to pop out as I went around. Eventually I got my fingers spread out far enough to hold the gasket and got it in.
1 to 2 hrs
Screwdriver, Nut Drivers
2 0
Just replaced pump with a Century 1hp. pump. The greatest part of this evaluation was the fantastic support I received from the on-line videos by InYoPools.com and their friendly and helpful staff. Not only the best prices but best service to boot.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Wire stripper/crimper
4 0
I purchased the correct motor from INYOU and it arrived days sooner than expected. I took the recommendation and ordered the seal kit as well. Finally on Fathers Day I had the time to tackle this daunting project. Always wary of anything electrical, I took every precaution I could to not electrocute myself with my son present. With everything checked and double checked the moment of truth arrived. I three the breakers on and then threw the switch on the timer box and........SUCCESS! The motor turned and the pump started circulating the water. Awesome feeling of overcoming a fear of electricity and knowing I did it right the first time. The tutorials from INYO were perfect and I saved over $ 330.00 doing it myself.
Less than 1 hr
Screwdriver, Socket Set
3 0
Removed pump by disconnecting power removing mounting bolts, impella cover and impella. Replaced pump. Tested same before installation and it didn't work. Contacted customer care and they sent me a new one in two days. Installed same after installing new gaskets upplied in the Super Pump tune up kit and new ceramic bearing
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
3 0
$266.00
$228.00
$223.00
The Most Recent Reviews
(5 out of 5 stars) Great Value!!!!
Reviewed By: Inyo Customer ()
Great value.
Was this review helpful to you?
(5 out of 5 stars) WORKS GREAT!
Reviewed By: Inyo Customer ()
WORKS GREAT!
Was this review helpful to you?
(5 out of 5 stars) Great product
Reviewed By: Inyo Customer ()
Great product. Fit perfectly and fast delivery.
Was this review helpful to you?
(5 out of 5 stars) Perfect fit
Reviewed By: Inyo Customer ()
This kit was an exact and perfect fit. I purchased it along with a replacement motor (model UST1102). The motor was bought to replace the Hayward motor (model C48K2N143B1) in Hayward filter pump assembly, SP2607X10. Be sure to watch the Inyo Pools instructional video on replacing the seals. It has several tips for things to look out for when replacing the seals. Just about everything the video cautions happened to me! These aren't really problems. The cautions are along the line of, "When you remove this part, there may be a another piece left behind on a shaft. Be sure to remove that." So, these aren't scary things; just tips and pointers. Excellent videos. Be sure and clean all the plastic parts when you disassemble things. There will be crud in there. Running water and a plastic scrub brush (NOT a wire scrub brush!) are all you need. You don't want to put nice, brand-new seals on dirty parts!
Was this review helpful to you?
(4 out of 5 stars) Quick and Easy Tune Up for Motor
Reviewed By: Inyo Customer ()
Needed this kit for a motor swap that I was doing. Really all I needed was the bearing, but I figured I would replace all the seals while I was at it. Customer Service was able to direct me right to the parts I needed quick and easily. The only small complaint I have is that the brand new seals were a little more difficult to fit where they needed to go. Eventually they fit, could just be part of the task.
Was this review helpful to you?
(5 out of 5 stars) Did the job
Reviewed By: Inyo Customer ()
Did the job
Was this review helpful to you?
(5 out of 5 stars) Great kit, very reasonable price.
Reviewed By: Inyo Customer ()
Great kit, very reasonable price.
Was this review helpful to you?
(5 out of 5 stars) Sure they will be handy
Reviewed By: Inyo Customer ()
Haven't used yet but sure they will be handy when needed
Was this review helpful to you?
(5 out of 5 stars) So far so good
Reviewed By: Inyo Customer ()
So far so good
Was this review helpful to you?
(5 out of 5 stars) Perfect and compatible
Reviewed By: Inyo Customer ()
The tune up kit was perfect and was compatible with the Century pump
Was this review helpful to you?
(3 out of 5 stars) Followed instructions meticulously
Reviewed By: Inyo Customer ()
Followed instructions meticulously. Although the water leak from my pump reduced, there is still a leak. Fortunately, this is for the spa jets. I just did not use it last fall. I turned it on when opened this spring and the water leak persists, actually as much as before i replaced the shaft seal. I'm going to order another one. I'm not a whining, litigious guy and I'm not going to blame INYO for this because I really like INYO for the information and the service. I have not come across another pool site or company that is this helpful. So, a small bill is easier to gulp.
Was this review helpful to you?
(5 out of 5 stars) Fast Shipment
Reviewed By: Inyo Customer ()
Fast shipment
Was this review helpful to you?
(5 out of 5 stars) Must have if you're replacing your motor
Reviewed By: Inyo Customer ()
A must have if you're replacing your motor.
Was this review helpful to you?
(5 out of 5 stars) Includes all seals/accessories you will need
Reviewed By: Inyo Customer ()
Included everything I needed when I replaced my pump motor
Was this review helpful to you?
(5 out of 5 stars) Good Price
Reviewed By: Inyo Customer ()
good price
Was this review helpful to you?
(5 out of 5 stars) It was amazing
Reviewed By: Inyo Customer ()
It was amazing to be able to have new parts when I put the motor on.
Was this review helpful to you?
(5 out of 5 stars) Perfect Kit
Reviewed By: Inyo Customer ()
Worked perfectly with our replacement pump. Came with everything needed to make the switching of the pumps easy and quick.
Was this review helpful to you?
(5 out of 5 stars) Worked great for my pump
Reviewed By: Inyo Customer ()
This product worked great for my pump
Was this review helpful to you?
(5 out of 5 stars) Worked well
Reviewed By: Inyo Customer ()
Worked well with install of my pump 3 years ago. Ordering again now as it looks like pump is not priming so seals may have worn out,
Was this review helpful to you?
(5 out of 5 stars) Time saver!
Reviewed By: Inyo Customer ()
Any parts you need plastic wrapped and to your door in matter of days.
Was this review helpful to you?
(5 out of 5 stars) Everything fit to a tee!
Reviewed By: Inyo Customer ()
Everything fit to a tee! Great value.
Was this review helpful to you?
(4 out of 5 stars) Good replacement parts as always
Reviewed By: Inyo Customer ()
Good replacement parts as always
Was this review helpful to you?
(5 out of 5 stars) Excellent prices
Reviewed By: Inyo Customer ()
Excellent prices...
Was this review helpful to you?
0 1
(4 out of 5 stars) The right kit
Reviewed By: Inyo Customer ()
The right kit
Was this review helpful to you?
0 1
(5 out of 5 stars) All the Seals You Need
Reviewed By: Inyo Customer ()
All the seals you need when replacing the pump motor. Nice!
Was this review helpful to you?
1 0
(5 out of 5 stars) My Pump is Like New!
Reviewed By: Inyo Customer ()
Everything I needed was in the kit. My pump is like new!
Was this review helpful to you?
0 1
(5 out of 5 stars) Low Cost and Easy to Change
Reviewed By: Inyo Customer ()
Low cost, easy to change out all necessary parts included.
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fit perfectly and the repair went really smooth
Was this review helpful to you?
1 0
(3 out of 5 stars)
Reviewed By: Inyo Customer ()
repair kit is ok need more instructions
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Shipping was quick. This is a very reasonable price and all of them fit perfectly with the new motor.
Was this review helpful to you?
(5 out of 5 stars) Great kit!
Reviewed By: Inyo Customer ()
Everything you need to replace your motor the right way.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Shipping was quick. This is a very reasonable price and all of them fit perfectly with the new motor.
Was this review helpful to you?
(5 out of 5 stars) A must with a new motor
Reviewed By: Inyo Customer ()
Easy to use. Worked well with the new motor
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Gasket kit worked great and was a perfect fit
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Everything was easy to install.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great fit and is very quiet. Would highly recommend
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easy to install and high quality
Was this review helpful to you?
(5 out of 5 stars) Great quality and excellent how toos
Reviewed By: Inyo Customer ()
Excellent parts and outstanding videos and how tops. Seriously saved me big $$$ being able to replace my old fried pump myself. This site is excellent!!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
every seal I needed was there, altogether
Was this review helpful to you?
(5 out of 5 stars) Good quality
Reviewed By: Inyo Customer ()
If you are replacing a pump motor.....you need this kit.
Was this review helpful to you?