1. Home
  2. Pool Parts
  3. Heater Parts
  4. AquaCal Thermostats, Microprocessors, & Control Panels
  5. STK0056

By Aqua Cal

Details

Top

Part # STK0056

Manufacturer Code STK0178

Dimensions 10" X 4-1/4"

Alternate Part #'s 0022, APLSTK0178, ECP0005F, LBP0027, STK0178

Product Description

The AquaCal STK0056 has been replaced by the AquaCal STK0178 which is a direct replacement for the STK0056

Top
Ask A Question

?     Asked on 12/2/2014by Inyo Visitor

Does the kit include the cable between the display board and the micro board?
 Reply

A  Answered on 12/4/2014 by InyoPools Product Specialist Brian M.

Hello - Kit part number STK0056 does include the cable between the display board and the micro board. If you have any other questions, may I suggest giving Aqua Cal a call at 727-823-5642.
 Reply


?     Asked on 10/11/2015by tony

Does this upgrade kit also include the mother board and the digital display?
 Reply

A  Answered on 10/13/2015 by InyoPools Product Specialist Lennox H.

Hi Tony, The Display Control Panel and Microprocessor PCB Board is included with p/n STK0056.
 Reply


?     Asked on 7/18/2016by Cindy

If I replace the control panel do I need to replace the inside board as well? If so how difficult is it to replace the inside board?
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Scott W.

It wouldn't be a bad idea to get them both at the same time. This will have to be special ordered though if you decide to purchase.
 Reply


?     Asked on 10/20/2016by James Nichols

I have a few of my display numbers segments that have stopped working, can I just get a replace display board?
 Reply

A  Answered on 10/20/2016 by InyoPools Product Specialist Scott W.

Yes, that is what you would want to do. If you have a model # for the heat pump that you have, I can make sure that is the correct display board that you need. If you do not have that information you can attach some pictures and I can identify it for you.
 Reply


?     Asked on 2/1/2017by mark

I have a 3 button I was told I had to change the board and panel two a 4 3 was discontinued if is every thing I need in the package?
 Reply

A  Answered on 2/1/2017 by InyoPools Product Specialist Lennox H.

Hi, Mark. The Three Button control panel has been replaced with the four button upgrade kit.
 Reply



Read all Q&A’s
Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
(100%) 2 of 2 customer would recommend this product to a friend.
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review

3     0

 (4 out of 5 stars)  AquaCal Heater Display

Reviewed By:  Mike F from Ft Lauderdale FL ()

Pros: Looks great

Cons: Two hour install

Installed new display and card for my AquaCal Heater. (You can't just replace the display anymore.) The old display was impossible to read during the day but the heater still worked fine. The new card had one difference: the power connectors (W24) have moved over one spot to the left; otherwise, all other connecters are one for one. The new cable also has to be installed and uses the RJ45 instead of RJ11 connectors so it's a tight fit. After confirming it all worked, when the RJ45 was removed from the card, the plug bent up and was unable to push it back in; however, it still functioned correctly after reconnecting.


Was this review helpful to you? 
 

The Most Recent Reviews

 (5 out of 5 stars)  Saved the cost of the display

Reviewed By:  Samuko from Port Orange, FL ()

Pros: Cost, OEM

Cons: None

Was told the repair would cost $600+ by a professional. Found this on line. Talked to their tech and in about 3 hrs had it up and running. Saved a fortune! Thanks INYOPOOLS!!


Was this review helpful to you?