1. Home
  2. Pool Parts
  3. Salt Pool Systems
  4. Hayward / Goldline AquaTrol
  5. GLX-PCB-TROL-RJ

$414.05

Qty:
 ADD TO CART

By Hayward Pool Products

Details

Top

Part # GLX-PCB-TROL-RJ

Dimensions 6.5" L x 5.5" W x 2" D

Alternate Part #'s GLXPCBTROLRJ, 43-150-1045, GOLGLX-PCB-TROL-RJ, HPPGLXPCBTROLRJ

Product Description

AquaTrol RJ Main PCB - GLX-PCB-TROL-RJ

  • Main Circuit Board for Return Jet Cell Style
Top
Ask A Question

?     Asked on 10/4/2015by Al

I have an Aquatrol Rj with the designation G1-066012c-1 rev c. Will your board work in my controller?
 Reply

A  Answered on 10/8/2015 by InyoPools Product Specialist Lennox H.

Hi Al, The Aquatrol RJ PCBoard (GLXPCBTROLRJ) will work in your Aquatrol RJ Controller.
 Reply


?     Asked on 6/20/2016by Greg

My display is not showing a reading but my timer keeps correct time. The timer is not turning on the pump . Tried replacing the display . Still nothing . No display reading . Is it the main board that is bad ?
 Reply

A  Answered on 6/20/2016 by InyoPools Product Specialist Scott W.

It's most likely the main board but I'd recommend calling Hayward at 908-355-7995 to confirm that.
 Reply


?     Asked on 6/21/2016by martin

on hayward goldline aqaurite controls where do i get serial numbers and how to tell what i have you have so many lines as pro etc thanks
 Reply

A  Answered on 6/25/2016 by InyoPools Product Specialist Alex V.

Martin, The serial number should be inside of the panel.
 Reply


?     Asked on 9/9/2016by Inyo Visitor

will this board work with a aquatrol system it seams to be for aquarite unit
 Reply

A  Answered on 9/9/2016 by InyoPools Product Specialist Joe S.

Yes the Pc Board Aquatrol Rj (glxpcbtrolrj) will be the correct board for the aquatrol system.
 Reply


?     Asked on 4/27/2020by Anita Gibson

Aqua Trol RJ shows PCB, and the power light is green. The no flow, and inspect cell lights are on as well, but orange. Can you tell me what part I need to get to fix it?

 Reply

A  Answered on 4/27/2020 by InyoPools Product Specialist Patrick P.

Hi Anita, The first thing I would suggest is to determine that you do actually have flow and to inspect the cell to make sure it is clean. If you determine you do have flow and the cell is clean then you will need to replace your PCB board with this GLX-PCB-TROL-RJ PCB Board. 
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
(0%) 0 of 1 customers would recommend this product to a friend.
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review