By Hayward Pool Products
Part # HLWALLMOUNT
The HLWALLMOUNT is a remote touchscreen terminal that wires directly to the OmniLogic pool automation controller. It is designed to fasten to a wall giving the user convenient access for monitoring and controlling their pool. Up to two HLWALLMOUNTs can be installed and connected to the OmniLogic. After installation, the OmniLogic will detect the new HLWALLMOUNT(s) and automatically configure itself to utilize the new terminal(s). Compatibility The HLWALLMOUNT is compatible with all OmniLogic pool controls
how long is the cord that is attached to the box
Reply
Hi Terri, cable is not included with this. Use four-conductor cable (typically phone cable, available at your local home center) to connect the remote display keypad with the OmniLogic Main Board. Refer to the chart on page 2 of the installation manual for the recommended wire gauge depending upon the length of the cable needed.
Reply