By Intermatic
Part # 143T135
Intermatic 240V Relay for PF series Freeze Protectect timers
Click here for more Intermatic Timers
is this relay the same one in the aqualink? the 3HP relay?
Reply
Hi Steve, The Relay w/ Harness For up to 3 HP Pumps (R0658100) will be the correct part for the 3 HP relay for the Jandy Aqualink.
Reply
How can you test this to see if it is the problem? I'm not getting voltage out of one leg of the 220 top the pump?
Reply
Hi, John M. Using a multi-meter, you can test the terminals to make sure that you're getting 110 volts each on the in and out.
Reply
My PF1202T will not shut off the main pump at all, even when I flip the switch to OFF, no matter what setting I dial the freeze protect to. The side that runs the Polaris pump works properly. I suspect it's either the relay or the thermostat?
Reply
Hello Louis, yes based on the information provided it does sound like the relay would need to be replaced.
Reply
