By Jandy


Details

Top

Model # APURE35PLG

Warranty One Year Warranty

Alternate Part #'s JDY-45-1436, JDYAPURE35PLG

Product Description

Jandy Ei Pool Chlorine Generator

The world's easiest to install operate and maintain chlorine generator.

The Jandy Ei is the latest product innovation from Jandy, the world's leading brand of salt chlorinator. The Jandy Ei has been designed with one goal in mind: to make chlorinating domestic swimming pools as easy as possible. From installation and set-up, right through to operation and maintenance, the Jandy Ei makes salt chlorination easy. It is ideal for those pool owners looking to trade-up from manual chlorine dosing or basic single polarity (non self cleaning) chlorinators.

The patented new design makes installation a breeze. Just drill a couple of holes and drive in a couple of screws.

The compact design and patented 'quick fit' clamping system mean that the Jandy Ei can turn your current manual chlorine pool into a safe, healthy saltwater pool on almost any filtration system. If you already have a salt pool and are looking to replace your tired old chlorinator, the Jandy Ei will easily fit onto your existing plumbing. You don't even need to take the old cell off. Just disconnect the power to the old unit, install the Jandy Ei unit alongside the old cell, plug it in and you are ready to go.

A simple, intuitive menu control makes operation easy as well. Simply set the clock and timers, add salt and you're done. Within 15 minutes you will have your new Jandy Ei up and running, all that's left to do is dive in. With just the touch of a button you can increase the chlorine output depending on how many people are in the pool or any other factors such as heat/rain etc. The control panel features warning indicators should any issues arise.

The Jandy Ei cell is equipped with true reverse polarity electrode plates. This means that any ongoing maintenance is kept to an absolute minimum as the unit performs a self cleaning cycle every few hours.

Product Specifications

Volts:
120 V
Max Pool Size:
35,000 gal.
Top

?     Asked on 2/1/2012by Guest

I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?
 Reply

A  Answered on 2/1/2012 by InyoPools Product Specialist Patrick P.

It is not a problem to oversize a salt system.  It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient.  When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.
 Reply


?     Asked on 2/29/2012by Guest

Is the salt included with the salt chlorine generator?
 Reply

A  Answered on 2/29/2012 by InyoPools Product Specialist Patrick P.

No, salt is not included.  You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool.  Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized.  Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
 Reply


?     Asked on 5/28/2012by Guest

Can this be used on a 15,000 gallon above ground pool?
 Reply

A  Answered on 5/28/2012 by InyoPools Product Specialist Patrick P.

The AquaPure Ei would be an ideal choice for a 15,000 gallon above ground pool.
 Reply


?     Asked on 9/28/2012by Guest

On the Zodiac AquaPure Ei, how long is the clamp and how much straight pipe is required on the return line?
 Reply

A  Answered on 9/28/2012 by InyoPools Product Specialist Patrick P.

The clamp for the AquaPure Ei is approximately 7" long. 1-1/3' of straight pipe is recommended for installation of the cell on the return line.
 Reply


?     Asked on 9/28/2012by Guest

Can the Zodiac AquaPure Ei be installed on 1.5" or 2" pvc pipe?
 Reply

A  Answered on 9/28/2012 by InyoPools Product Specialist Patrick P.

The Jandy AquaPure Ei can be installed on 1.5" and 2" pvc pipe. There is a spacer included to adapt to 1.5" pvc. The spacer is not required for installation on 2" pvc.
 Reply


Top

Review Summary

 (Average 4.23  out of 5 stars)
9 Rating
5 star:
 
(5)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Recent Reviews