By Pentair Pool Products
Model # 520548
Click Here to view the entire line of Pentair EasyToch Controls
EasyTouch Indoor Control Panel for 4 Circuit Systems. Rquires running wire from the outdoor power center back to the indoor wall mounted contoller. Used on EasyTouch 4 Function Systems
For more Pool Controls
Is the EasyTouch Compatible with a home automation system like the RS-232 or RS-485?
Reply
No the Easy Touch will not tie into a home automation system. You would need to go with the Pentair Intellitouch in conjunction with the Pentair I-Link. The I-link will tie the home automation system into the Intellitouch system. Here is a link where you may view the Pentair IntelliTouch Systems along with additiona acessories http://www.inyopools.com/controls_pentair.aspx You may view the I-Link home automation adapter through this link http://www.inyopools.com/Products/03500004032759.htm
Reply
Will this Remote replace my P4HEASYTOUCH / IC: 4249A-EZHNHLD ?
IF SO WILL IT REQUIRE PROGRAMMING?
Reply
I spoke to Pentair Technical Support ( 800-831-7133 ) and was told that, yes this item will be the correct replacement. There would be no need for programming as the main box is what has all the intelligence. The control is just an extension. For more information, please see the Pentair Easy Touch User's Guide.
Reply
The description says for a four function system, but the picture shows 8 buttons. Which one is correct.
I am looking to replace a 4249A EZHNDHLD system with 8 functions.
I found models on amazon, but they said they needed have an upgrade card in the main unit on the wall by the pool. Was trying to avoid that.
Thanks
Reply
Good afternoon Dave, You can speak with Pentair Technical Support ( 800-831-7133 ). They can assist you with questions on the current product or recommend a product that will work with your current system.
Reply