$441.86

Qty:

By Pentair Pool Products


Details

Top

Model # 360042

Alternate Part #'s PEN360042

Product Description

New! Introducing the Newly Designed Kreepy Krauly Cleaner, a New Modern Design Enhanced by Rugged Construction and Ultra Reliable Service Life.

Classic PERFORMANCE REDESIGNED
It's been redesigned for greater cleaning coverage from the water line to the pool bottom. But it still gives you all the simplicity and reliability that over three million owners have trusted for decades. Kreepy Krauly cleaner's powerful suction relentlessly removes dirt and debris automatically. And with only one operational moving part, you can count on years and years of dependable service, and an exceedingly low cost of operation.

FEATURES

  • Redesigned for greater cleaning coverage from water line to pool bottom.
  • Powerful suction makes removal of both large and small debris a cinch.
  • No wheels, gears, or diaphragms to continually replace or repair.
  • Regulator valve automatically adjusts water flow to set the ideal speed for maximum cleaning performance.
  • No expensive, energy draining booster pump to buy, saving you significantly on your utility bills.
  • Installs in minutes, with no tools required.

 

Product Specifications

Surface Type:
Vinyl & Fiberglass
Hose Size:
40'
Manufacturer:
Pentair
Pool Type:
In Ground
Cleaner Type:
Suction
Pool Surface:
Vinyl
Pool Size:
Up to 40' Long
Top

?     Asked on 5/22/2015by shannon

My Kreepy Krauly doesn't seem to be able to move along the pool this year. We have just opened and when closed last year everything was fine with it. I have tried connections through the skimmer and the vacuum system and both seem to be working. I can see water moving through the hose and hear Kreepy suctioning. Any ideas?
 Reply

A  Answered on 5/22/2015 by InyoPools Product Specialist Brian M.

The most common problem is the filter. Depending on the type you have ( cartridge,DE or sand ) you can try this. If you have a DE or sand filter, put the backwash valve on re-circulate. This will simply take the water from the pool and redirect straight back, bypassing the filter. If you have a cartridge, please remove the element and seal the tank back up. Run the systems for a few minutes and see if the cleaner wakes up. If it does, the filter is the issue. If there is still a problem, there may be a leak in one of the tubes or the flapper is having an issue. But please try the filter experiment first.
 Reply

  • Commented on 3/22/2019 by Product Owner

    It sounds like your impeller attached to the motor is partially clogged with small debris, this is common in the spring when tree's Bud out , remove the motor from the basket usually 4 bolts and pull the motor out which will expose the impeller pull the debris out of impeller then reattach ( prime the basket with water ) & restart pump !! don't be intimidated very easy to do. Good luck !
     Reply


?     Asked on 9/23/2015by Bruce

Is the hose etc included
 Reply

A  Answered on 9/23/2015 by InyoPools Product Specialist Lennox H.

Hi Bruce, The Kreepy Krauly Pool Cleaner for Vinyl & Fiberglass Pools does includes the hoses and accessories needed for installation.
 Reply


?     Asked on 8/2/2017by Valerie Kane

I need a pleated skirt for this particular model K Krawly. How much is it and what is the part number? Thank You.
 Reply

A  Answered on 8/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Valerie. You can use the Pureline Kreepy Krauly Pleated Seal with this cleaner. 
 Reply


?     Asked on 4/6/2018by Inyo Visitor

during the opening of pool....to get the bulk of debris from the pool..is it best to vac on waste. to remove the materials, then return to filtering????
 Reply

A  Answered on 4/6/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, I would recommend vacuuming to waste to get most of the debris out of the pool. 
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)