Product Description

The AK600 ™ is the most advanced multiple pool controller available, providing the ultimate in equipment room automation. Up to 16 output relay combinations, configurable for 6 types of control. The AK600 can be customized for any facility, with voltage-configurable control relays and bidirectional control, database information options accessible via direct link, dial-up, wireless modem and ethernet connectivity. With control of chemicals, pumps, filters, heaters, air handlers, chloramine reduction systems and the ability to interface with building management systems for up to 3 bodies of water, the AK600 completes an aquatic facility.

Features:

• AcuCom ™ Software
• Multiple pool control for 1, 2, or 3 pool configurations
• Programmable pH, ORP, and temperature set points
• Programmable proportional feed for precise chemical feed
• Programmable acid, CO2, or base feed for pH control
• Relay configuration shortcuts with Acu-Trol ® Wizards
• Auto backwash filters for up to 2 bodies of water
• Flow cell with built-in flow switch, shut-off valves, inlet strainer, and sampling port
• 16 relays with three (3) voltage configurations
• Sensors
  The AK600™ sensors are capable of measuring ORP, pH,
  free chlorine, conductivity, temperature, flow rate and
  pressure.
• Flow Cell
  The AK1200™ offers inlet and outlet valves for
  sensor protection and third outlet for ease of water
  sampling
• Relays
  Customized relay control for up to 96 combinations
• Colorimetric Compatible
  Compatible with the AKColor™ Colorimetric PPM
  sensing measurement system for free and total chlorine
• Readings
  The AK600 displays the Puckorius, Langelier or Ryzner
  indexes and differential influent and effluent pressure
• Data Recording
  In the absence of power, the AK600 will retain
  programming information, calibration, and recorded data
• Alarms
  Alarms are activated by sensor measurements and will
  communicate at two hour until alarm is cleared
• Communication
  The AK600 communicates using the AcuCom™
  and AcuManage II™. Software packages provides
  wireless communication with modem modules.
• Security
  Password protected allows limited access

Options:

• AcuManage II™ Website
  Notification alarms and sensor readings
  AcuManage II available via wireless or AcuPort™
  communication only
• AcuPort™ Connectivity
  Ethernet, WiFi or RS422/485
• Input/Output Modules
  AK245™ Quad 4-20mA/O-5VDC output
  AK250™ Quad 4-20mA/0-5VDC input
• Acu-Trol® Absorb It™
  Controls the Acu-Trol’s Absorb It system for the
  use of CO2 for optimal pH and alkalinity control
• AKColor™ Sensor
  The AKColor colorimetric sensor system measures PPM
  of free chlorine with the DPD (N, N-DIETHYL-P-PHE
  NYLENEDIAMINE) test
• Influent/Effluent Pressure Sensor
  Pressure information for control of an automatic
  backwash
• Optical Level Sensor
  Measurement and automatic control of water level
• Digital Flow Sensor
  Displays flow rate in gallons per minute
• Conductivity Sensor
  Measurement of water TDS
• Premounting
  Mounted on easy to install polypropylene predrilled board
• Serial Printer
  On site printer capability with separate module

Programmability:

• pH, ORP and temperature set point
• ORP calibration
• ORP super-chlorination
• PPM control
• Temperature calibration
• Proportional feed
• Feeder ON and OFF times
• Mix times and cycle times
• Overfeed lock out times
• Acid/Base feed pH control
• Auto backwash filter settings
• Water level
• Auto probe clean
• 16 pager numbers
• 7 passwords
• pH Alarms, pH set point ± percentages, Overfeed disables pH feed, Flow switch disables pH feed, High pH disables feed
• ORP Alarms, ORP set point ± percentages, Overfeed disables, Disinfectant feed, Flow switch disables feed

Review Summary