Product Description

Raypak is proud to introduce its new heat pump product line. Every Raypak heat pump now comes standard with a titanium heat exchanger. The Professional Series and Classic Series heat pumps have been designed to meet the exacting needs of the pool and spa professionals. Raypak offers a feature rich entry level heat pump, the Professional Series, which provides rock solid performance at an affordable price.The Classic Series offers a top of the line product for the customer who demands the best.

6300ti Specifications:
BTU Output: 115,000
C.O.P: 5.5
Compressor: Scroll
Refrigerant: R-22
Voltage: 208/230V - 1 Phase: 60 HZ
Maximum Circuit Ampacity: 40
Maximum Breaker Size: 60 Amps
Electrical Input: 6.1 kw
Heat Exchanger: Titanium
Water Flow: 25-80 GPM

WARRANTY EXCLUSIONS 
This Limited Warranty does NOT apply; 
1. if the product has been moved from its original place of installation, or if the original 
owner no longer owns the property where the original installation was made; 
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in 
accordance with applicable local codes and ordinances, good trade practices, and the 
manufacturer’s installation instructions; 
3. if the rating plate(s) or serial number(s) are altered or removed; 
4. if the product is modified in any way, or non-factory authorized accessories or other 
components are used in conjunction with the product; 
5. to damage, malfunctions or failures resulting from failure to properly install, operate or 
maintain the product in accordance with the manufacturer’s instructions; 
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze, 
lightning or the like; 
7. to damage, malfunctions or failures resulting from [or due to] connected system control 
devices; 
8. performance problems caused by improper sizing of the heater or electric service 
voltage, wiring or fusing; 
9. use of any attachment, including any energy saving device not authorized by the 
manufacturer. 
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to, 
freeze-ups, operating the heater with the cabinet door off, having flow restrictions or 
obstructions between the heater outlet and the pool/spa, or not maintaining a proper 
chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100 
and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM)