$1,103.48

Qty:

By S.R. Smith


Details

Top

Model # 6820958662

Alternate Part #'s SRS68-209-58662, SSR6820958662

Product Description

The Frontier II board is available in 6 ft. and 8 ft. lengths. The board is intended for light to moderate use on residential swimming pools. Frontier II boards consist of one, wide laminated, wood core runner that extend along the entire length of the board. The board's durable acrylic outer surface will not scratch or fade — providing many years of recreational enjoyment.

Frontier II boards come in combination with the Frontier II Jump Stand. The Frontier II jump stand is a radiant white, powder-coated, opposing force steel spring that produces good board action and a clean look. Stand is intended for use only with the 6-foot (1.83m) and 8-foot (2.44m) Frontier II board and comes complete with Uni-Mount jig and stainless steel hardware to simplify, ease and quicken installation.

  • Includes Uni-Mount Jig & Hardware
  • Weight Limit: 250 lbs.


Available in the following colors:

sr smith diving board colors

Diving Board Dimensions:
sr smith frontier II diving board dimensions
sr smith diving board dimensions chart
Jig Dimensions:
sr smith three bolt jog pattern
sr smith three bolt pattern jig chart
 Click here for more Diving Boards

Side Trim Color Side Trim Color
Stand Color Stand Color
Top Tread Color Top Tread Color

Product Specifications

Length:
6 ft.
Top

?     Asked on 5/2/2008by Guest

What size diving board can I use on my pool?
 Reply

A  Answered on 5/2/2008 by InyoPools Product Specialist Patrick P.

Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.
 Reply


?     Asked on 10/5/2012by Guest

I've had to replace the stand twice. Is there a heavier duty replacement stand that uses the same bolt pattern? I take the board and stand off each winter as one unit. The stand always cracks between the back two bolt holes. Could I be bolting it down wrong?
 Reply

A  Answered on 10/5/2012 by InyoPools Product Specialist Patrick P.

There is no other Spring Stand which you could use as a replacement. One possibility would be to go with the SR Smith Cantilever Stand and Board, this is a much sturdier and rugged board but you would get less bounce. The board and base combination would not use the same bolt pattern so you would need to purchase the S.R. Smith Epoxy Kit, this would require that you cut your existing bolts flush with the deck. You would then drill 4 holes in your deck and apply epoxy to the 4 bolts which come in the kit; you would then stick these 4 bolts into the deck so you will now have 4 new bolts sticking up out of your deck which can accommodate the new Cantilever stand. Thanks for the great question!
 Reply


?     Asked on 10/8/2012by Guest

I have a need for a diving board with a higher weight capacity than 250 pounds. Is there one available that can handle a person around 300 pounds?
 Reply

A  Answered on 10/8/2012 by InyoPools Product Specialist Patrick P.

The S.R. Smith U-Frame coupled with the Frontier IV Diving Board has a weight capacity of 400 ponds.
 Reply


?     Asked on 2/18/2016by Steve

Is the stand attached to the board? If not is that hardware included?
 Reply

A  Answered on 2/19/2016 by InyoPools Product Specialist Lennox H.

Hi Steve, The Stand does not come attached to the board, you would have to assemble it and the hardware's are included.
 Reply


?     Asked on 7/21/2016by Abbi

What is the actual weight of the board?
 Reply

A  Answered on 7/21/2016 by InyoPools Product Specialist Lennox H.

Hi Abbi, The actual weight of the board is 52 lbs which differs from the shipping weight.
 Reply


Top

Review Summary

 (Average 4.34  out of 5 stars)
3 Rating
5 star:
 
(1)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews