$732.63

Qty:

By S.R. Smith


Details

Top

Model # 66209266S21W

Manufacturer Code 66-209-266S2-1

Alternate Part #'s 66209266S21, SSR66209266S21

Product Description

The Fibre-Dive board is available in 6 ft., 8 ft. and 10 ft. lengths. The board is intended for light to moderate use on residential swimming pools. Fibre-Dive consists of two laminated, wood core runners that extend along the entire length of the board. Durable acrylic outer surface will not scratch or fade — providing many years of recreational enjoyment. 

Features:

    • Inground pool application
    • Compatible with S.R. Smith U-Frames and Flyte-Deck II Diving Stands
    • Specifications:
      Model# 66-209-266S2-1
      2 hole – 12” on center
      74” length
      20” wide
      3” high
      Radiant white color
      Fiberglass reinforced core
      Acrylic shell with flexible outer edges
      Non-slip tread
      Rated to 250 lbs
      * Weighs 36 lbs
  • Note: Meets all APSP standards when installed properly


Available in the following colors:

- Radiant White
- Marine Blue
- Pewter Gray
- Taupe
- Silver Gray
- Gray Granite
- Sandstone

  • 3 Year Warranty
  • Weight Limit: 250 lbs.

Click here for more Diving Boards

Side Trim Color Side Trim Color
Top Tread Color Top Tread Color

Product Specifications

Length:
6 ft.
Top

?     Asked on 5/2/2008by Guest

What size diving board can I use on my pool?
 Reply

A  Answered on 5/2/2008 by InyoPools Product Specialist Patrick P.

Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.
 Reply


?     Asked on 10/8/2012by Guest

What are the center measurements between the 2 mounting bolts for the Fibre-Diver Board?
 Reply

A  Answered on 10/8/2012 by InyoPools Product Specialist Patrick P.

The center-to-center measurements for this board's mounting bolts are 12".
 Reply


?     Asked on 10/9/2012by Guest

What is the distance between the board mounting bolts and the back edge of the Fibre-Dive Board.
 Reply

A  Answered on 10/9/2012 by InyoPools Product Specialist Patrick P.

The bolt to back edge measurement for the S.R. Smith Fibre-Dive Board is 4 inches.
 Reply


?     Asked on 5/10/2018by Inyo Visitor

UNDERSTAND THE BOLT HOLES ARE 12" ON CENTER. WHAT IS THE WIDTH OF YOUR BOARDS?
 Reply

A  Answered on 5/12/2018 by InyoPools Product Specialist Lennox H.

Hi. The width of the board is 17-1/4 inches. 
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)