By Sta-Rite


Details

Top

Model # P2RA5D

Alternate Part #'s STA-10-443

Product Description

  • Large Trap - minimizes pool maintenance by collecting large amounts of debris without clogging or starving your pump.
  • Moves Large Volumes of Water - with comparatively small amounts of electricity.  This saves energy, which is not only good for you, but also for the environment.
  • Thermoplastic Housing - withstands the elements and temperature extremes.
  • Finger Opening Drain Plugs - lets you winterize your pump without using tools.
  • Warranty 1 yr parts and labor

Click here from Sta-Rite Pumps

Top

?     Asked on 1/16/2012by Guest

I have Sta Rite Dura-Glas (not Dura-Glas II) that I need to replace. I dont see the entire pump listed for sale anywhere, only replacement parts. Do you have this pump? Is there another pump that would be a direct replacement?
 Reply

A  Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

You are correct, the Dura-Glas is no longer available as a whole unit, only parts are available. As for a true drop in replacement there is none but we do recommend the Max-E-Pro series as an equivalent and durable replacement.
 Reply


?     Asked on 3/21/2015by Randy

I have a model P2R A5D 120 pump. It has a copper sleeve that the seal mating ring fits into. The sleeve looks okay. Can I install a new seal into it, or will I have to replace the seal plate? Thanks.
 Reply

A  Answered on 3/23/2015 by InyoPools Product Specialist Brian M.

Yes. You can simply replace the Shaft seal. There are 3 options to go with : 5056-08 is the Sta-Rite OEM , 5250-100 is the generic seal , and 5250-200 is the shaft seal for a salt system.
 Reply


?     Asked on 9/6/2017by JOZEF MADZIK

I would like to replace my old pool pump P2RA5D-120 with the new one. My pool is in ground rectangle 30x15 feet with slope down bottom to 8 feet deep end. What size of the pool pump do I need to purchase? thanks
 Reply

A  Answered on 9/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Jozef. You can use the Speck EasyFit MXG 3/4HP Max Rated Pump - IG281-1075M-0DG as a drop in replacement for this pump. 
 Reply


?     Asked on 7/21/2021by David Edmondson

My pool pump has stopped working P2RA5D 120 L without changing the whole system can I increase the size of motor from 3/4 to 1 HP . and what additional parts would I need when changing out the motor
 Reply

A  Answered on 7/21/2021 by InyoPools Product Specialist Craig C.

Hello David.  It is possible to transition to a higher total horsepower motor without changing the entire pump.  Increasing the horsepower of the motor would necessitate a change in the impeller and possibly the diffuser.  Note;  the total horsepower (THP) rating of a motor is the product of the horsepower (HP) times the Service Factor (SF).  HP and SF information is located on the motor label.  Example:  Your 3/4 horsepower motor may have a SF of 1.27 = .95THP  (1 HP)  You may already have a 1 THP, in which case you may wish to upgrade to a 1.5 THP motor.  Attached please find an exploded parts diagram for the Dura-Glas Pump.  Matching the motor (key 1) to the impeller (key 10) and the diffuser (key 11) add the GOKIT and the project has the necessary parts.  Sta-Rite Dura-Glas
 Reply


Top

Review Summary

 (Average 4.8  out of 5 stars)
5 Rating
5 star:
 
(4)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews