By Sta-Rite


Details

Top

Model # P2RA5YFL

Alternate Part #'s P2RA5YF182L

Product Description

  • Large Trap - minimizes pool maintenance by collecting large amounts of debris without clogging or starving your pump.
  • Moves Large Volumes of Water - with comparatively small amounts of electricity.  This saves energy, which is not only good for you, but also for the environment.
  • Thermoplastic Housing - withstands the elements and temperature extremes.
  • Finger Opening Drain Plugs - lets you winterize your pump without using tools.
  • Warranty 1 yr parts and labor

Click here from Sta-Rite Pumps

Top

?     Asked on 6/15/2006by Guest

How does the dual speed feature of this pump work?
 Reply

A  Answered on 6/15/2006 by InyoPools Product Specialist Patrick P.

Some dual speed pumps have a toggle switch in the back of the motor to change speeds manually, but many do not. Generally you would need to tie this dual speed pump into one of our dual speed pump timers/controllers. One of the more popular models is the Digital PE153 series. This timer has 3 functions: one to turn the pump on and off, a second auxiliary to switch from high speed to low speed, and then a third for any other piece of pool equipment. You may view these controllers through the following link: Intermatic Timers
 Reply


?     Asked on 1/16/2012by Guest

I have Sta Rite Dura-Glas (not Dura-Glas II) that I need to replace. I dont see the entire pump listed for sale anywhere, only replacement parts. Do you have this pump? Is there another pump that would be a direct replacement?
 Reply

A  Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

You are correct, the Dura-Glas is no longer available as a whole unit, only parts are available. As for a true drop in replacement there is none but we do recommend the Max-E-Pro series as an equivalent and durable replacement.
 Reply


?     Asked on 6/26/2017by M. Khorrami

I have this pump but it is leaking. Do you have the pump seal or anything equivalent that you would recommend....Thanks
 Reply

A  Answered on 6/28/2017 by InyoPools Product Specialist Hector F.

Yes, you can use the GOKIT6 for the pre-1998 series and the GOKIT54 for the after series. If you are not sure which series that you have then you can just use the GOKIT54 and remove the copper cone that is in the motor shaft hole on the seal plate so the kit will work. You may also want to inspect the pump housing for any cracks or warped parts as well. 
 Reply


?     Asked on 6/18/2019by William Krisanits

i need an replacement motor that will fit this
 Reply

A  Answered on 6/18/2019 by InyoPools Product Specialist Lennox H.

Hi, William. The SQS1102R motor along the Tune Up Kit - GOKIT54 are the replacement parts you will need for this model pump. 
 Reply

  • Commented on 6/19/2019 by Product Owner

    Is there a 110 volt version of this? Mine seems to be 110 with only three wires from the switch

     Reply


?     Asked on 8/17/2019by kelcie Krisanits

how warm should this get when operating? mine is running a bit hot to the touch
 Reply

A  Answered on 8/17/2019 by InyoPools Product Specialist Lennox H.

Hi, Kelcie. The ambient temperature rating is on the motor label most are rated at 40 or 50 degrees. That means that it can operate at that temperature over the ambient air temp. 
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews