Product Description

CF Series self-priming centrifugal pumps are available in 3⁄4 to 3 HP models and feature all bronze construction with an integral hair and lint
strainer. Motors are open drip-proof type, NEMA® Series “C” flange design with a stainless steel shaft extension. The non-clogging semi-open
impeller is coupled to the motor by an adjustable stub shaft. Suitable for outdoor installation. For residential and commercial swimming pools and spas. Maximum suction lift is 8 ft.

Standard Features:

• All bronze construction provides exceptional performance under heavy duty swimming pool applications – proven durability for many years
  of service.
• Available with 5" or 6" hair and lint strainers integral with pump.
• Precision-molded ABS strainer baskets feature locking design for secure fit and are easily cleanable.
• Bronze semi-open, non-clogging impeller is precision balanced for smooth operation and long seal life.
• Designed for easy serviceability – motor, impeller and seal can be removed without disturbing piping.
• Motor components are protected and easily accessible under “control room” end canopy.

Materials and Design:

• Hair and Lint Strainer:
  • Integrally cast to pump body
• Material:
  • Bronze body, cover and locking handles
• Size:
  • 5" - 2" NPT Suction Port'
  • 6" - 2" NPT Suction Port
• Basket:
  • Molded ABS; lock-in design positioned completely below the inlet port of the strainer body.

Pump Body: Volute type, back pull-out

• Port Size = 1.5" NPT Discharge Port
• Material = Red Brass
• Motor Adapter = Bronze, built-in mounting foot
• Impeller = Bronze semi-open type

Motor

• Frame Size:
  • NEMA "C" flange, 48 frame thru 2 HP
  • 3 HP is 56 Frame
• Shaft = Stainless steel, keyed.
• Design
  • 3/4 - 3 HP, 3450 RPM, open drip-proof, single phase, continuous duty.
  • 65 BHP - Split phase
  • 95 - 1.65 BHP - Capacitor Start/Induction Run
  • 2.20 - 2.60 BHP - Capacitor Start/Capacitor Run
  • 3.3 BHP - Capacitor Start/Induction Run
• Bearings = Sealed ball type, permanently lubricated
• Thermal Overload Protection = Internal, automatic reset. 3-phase model requires external thermal overload protector.

Electrical

• Power Supply Required
  • Single phase - 115/230V or 230V only (1.5" to 3 HP)
  • Three phase - 230/460 Volts
• Maximum Limits
  • Liquid Temperature: 125°F
  • Ambient Air Temperature: 122°F
  • pH Range: 4 -9

Review Summary