Part # SAVI-MELODY150
SAVI Melody is part of a small but powerful lighting system designed to create even illumination and colorful lighting effects throughout your pool and spa. They fit into standard pool fittings as shallow as 4-IN below water level so they are ideal for swimouts, beach entries, sun shelves and other shallow water applications. Multiple SAVI Melodies placement will provide even illumination throughout the pool & spa. No niche is required for installation. The SAVI MELODY fits into a standard return fitting with a minimum 14 inches of 1.5" diameter PVC pipe. Then reduce to a 1" diameter conduit for the cable run to the transformer.
Additional Product Information:
5 Vibrant Colors Include:
4 Color Shows:
The SAVI Melody can be wired to any 12 VAC transformer, wire transformer to any controller, wall switch, etc. NO SEPARATE CONTROLLER NEEDED. Use 1, 2, 3 or more Melody light(s), you are only limited by the size of your transformer. Just toggle power switch off/on to change modes.
Product Specifications:
How many Savi Melody lights can I connect to one 12v transformer?
Reply
According to the manufacturer, a maximum of 7 Melodies per 100-watt transformer and a maximum of 21 Melodies per 300-watt transformer.
Reply
Is the savi melody dimmable? Can the savi melody be used in the bottom of a pool 4ft deep shooting up on the floor?
Reply
The SAVI MELODY is not dimmable. You can put these in the floor of the pool but keep in mind that you need 14 inches of straight 1.5" pipe going into the back of the wall fitting to accomodate for the Melody. After the 14 inches of straight pipe you can use a 90 or whatever fittings you need at that point. The same applies if you are installing in the wall of the pool. You may view or purchase the SAVI Melody here >http://www.inyopools.com/lights_nexxus_melody.aspx
Reply
Can I put a SaVi LED Light into an existing return jet. How does that work.
Reply
It doesn't. These lights are not intended to work with existing return jets in your water lines. They use a wall fitting very similar to the return jet which has piping behind it to take wire up to a transformer. This is something you do when installing your pool.
Reply
How do I sync the savi melody pool lights?
Reply
If they are all connected to the same junction box, they should automatically sync together. When you toggle the light switch off and back on they should sync up.
Reply
The Most Helpful Review
3 2
(5 out of 5 stars) Great Fiber optic to LED light upgrade
Reviewed By: Pool guy from Austin, TX ()
Pros: Great bright color, nice effects,
Cons: Installation had an issue
This light was used to replace a noisy dull lighted Fiber optic system with a huge ugly box that encased the light. It was almost a super easy upgrade until the light did not glide into the curved conduit coming from the pool. It needed approximately 12" of no or a very gradual slope to easily slide in. I read an article with a video on the internet and it walked me through the process and voilà it works great - Highly recommend it!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
These were a replacement for the first model purchased new which you could not replace bulb only. At this point new replacements (4) working fine. The mfg should have step up with a discount.
Was this review helpful to you?