$128.13

Qty:

By Pureline


Details

Top

Part # FG1003PACK

Alternate Part #'s FC-9530, FS2003, PFS1836, PL0187

Product Description

Replacement DE Grid Package for Hayward and Pentair 36 Sq. Ft. DE Filters (8 DE Grids)

This is a package of 8 DE Grids used on the most common DE Pool Filters like the Hayward Pro-Grid, Hayward Micro Clear, Pentair FNS Plus, Pac Fab Nautilus and more! Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance. Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced.

Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance.  Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced.  These Grids are generic grids that are made by either Unicel, Filbur, Pureline or Pleatco.   

Commonly Used On:

  • Hayward Pro-Grid (DE3620)
  • Hayward Micro Clear (DE3600)
  • Pentair FNS Plus
  • Pac Fab Nautilus

Specifications:

  • Package includes 7 Full Grids and 1 Partial Grid
  • Used on 36 Sq. Ft. Filters
  • Grids Measure 18" in length

Features:

  • Woven polypropylene grid fabric allows consistent water flow
  • Sturdy frame supports grid fabric
  • Fits many of the most common 36 sq ft DE filters
  • Quality comparable to OEM grids

*Most DE filters require 7 full Grids and 1 Partial grid. This is a pack which includes 7 full grids & 1 partial grid.

Filter Area (Sq. Ft.). Grid Length Indentification Full Grid Part # Partial Grid Part # Full Grid Width Partial Grid Width
24 12" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1002
PL0180
PG1902 
PL0170
11 - 1/2" 9 - 1/2"
36 18" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1003
PL0181
PG1903
PL0171
11 - 1/2" 9 - 1/2"
48 24" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1004
PL0182
PG1904
PL0172
11 - 1/2" 9 - 1/2"
60 30" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1005
PL0183
PG1905
PL0173
11 - 1/2" 9 - 1/2"
72 36" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1006 PG1906 11 - 1/2" 9 - 1/2"

Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).

Mars

Mars

Product Specifications

Area:
36 sq. ft.
Top

?     Asked on 9/14/2012by Guest

What is the micron rating for a Unicel element?
 Reply

A  Answered on 9/14/2012 by InyoPools Product Specialist Patrick P.

All Unicel elements & grids have a 20 Micron Rating.
 Reply


?     Asked on 7/28/2015by trish

will these work with an older hayward DE 3600 filter?
 Reply

A  Answered on 7/29/2015 by InyoPools Product Specialist Hector F.

Yes this grid pack will work on the older Hayward Micro Clear D.E. 3600 model.
 Reply


?     Asked on 7/29/2015by B.H

I have a Model E-LE-42052 manufactured by Hayward but sold through LESLIES pool supply as a Crystal Clear II DE filter. Will the 36ft/2 work with this model?
 Reply

A  Answered on 7/30/2015 by InyoPools Product Specialist Lennox H.

Hi B.H, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) will work with your current Crystal Clear II 36 sqft DE filter.
 Reply


?     Asked on 8/11/2015by joe

I have a purex triton fns plus DE filter, model #fnsp 36, 2009 E, and need a replacement grid pack. Will this model fit? Thanks
 Reply

A  Answered on 8/13/2015 by InyoPools Product Specialist Lennox H.

Hi Joe, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) (PL0187) will be the correct replacement size grid pack.
 Reply


?     Asked on 11/10/2015by Jacque stretz

Is this a Hayward product?
 Reply

A  Answered on 11/11/2015 by InyoPools Product Specialist Charlie R.

Jacque,No, these grids are a generic brand and not the OEM Hayward version.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

4     0

Pool filter grids had holes in them.

Written on 6/19/2018 by John S.

Drained the filter, lifted off the top and removed the filter assy. Unscrewed 2 nuts and removed the grids. Assembled the same way. Put some lube on the water inlet to assist the rubber ring seal

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set, Wrench Set

1     0

Torn filter screens

Written on 5/8/2018 by Guest

This was done while the pool was closed so the prerequisite steps of relieving pressure, draining and opening the filter were already done, and the filter assembly was already removed.

1. Using a wrench or pliers to hold the bolt at the bottom, loosen the threaded rod that runs through the filter assembly. No need to completely remove the rod.
2. Carefully pop the top plate off the individual filters - in my case, a couple were stubborn, but with some gentle persuasion, they came loose.
3. Pay close attention to where the short filter fits. It isn't that complicated if you look at where it fits in relation to the gap on the bottom plate. Also note how the screens fit in between the spacers/holders in the bottom plate.
4. I found it easiest to remove all the screens, wash off the top and bottom plates, and then re-assemble. Again, make sure the short screen is in the correct position.
5. Reposition the top plate - it can take a little bit of fiddling to get all the screens aligned with the holes in the top plate, but take your time and you'll get it.
6. Again, with a wrench on the bottom of the threaded rod, tighten from the top.
7. Confirm that there is a space for the outflow tube from the gap in the bottom plate up to the connection in the top plate. If not, you installed the short screen in the wrong place.
8. In the filter body, make sure the o-ring where the filter assembly meets the outflow tube is in good shape and is well lubricated.
9. Press the filter assembly on to the outflow tube
10. Re-assemble and recharge your filter per the instructions.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Socket Set

1     0

pool green and cloudy and could not get it to clear up

Written on 3/5/2017 by Guest

After changing the DE and still no improvement, I decided the filter was not working. So I pulled the top half off the filter and found that 5 of the grids were broken off where they connect to the outlet header of the filter. This allowed the water and the new DE I added to pass right through the filter and back into the pool. I went to INYOpools on internet and ordered a new set of grids for my filter and associated o-ring. I installed the new grids and new DE and within 2 days the water was clear as it should be.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.96  out of 5 stars)
24 Rating
5 star:
 
(23)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews