$179.90

Qty:

By Pureline


Details

Top

Part # FG1004PACK

Alternate Part #'s FC-9540, FC9540, FS2004, PFS2448, PL0188, R0442700, APCFS2004, FMFFC9540

Product Description

Replacement DE Grid Package for Hayward and Pentair 48 Sq. Ft. DE Filters (8 DE Grids)

This is a package of 8 DE Grids used on the most common DE Pool Filters like the Hayward Pro-Grid, Hayward Micro Clear, Pentair FNS Plus, Pac Fab Nautilus and more! Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance. Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced.

Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance.  Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced.  

Commonly Used On:

  • Hayward Pro-Grid (DE4820)
  • Hayward Micro Clear (DE4800)
  • Pentair FNS Plus
  • Pac Fab Nautilus

Specifications:

  • Package includes 7 Full Grids and 1 Partial Grid
  • Used on 48 Sq. Ft. Filters
  • Grids Measure 24" in length

Features:

  • Woven polypropylene grid fabric allows consistent water flow
  • Sturdy frame supports grid fabric
  • Fits many of the most common 48 sq ft DE filters
  • Quality comparable to OEM grids

*Most DE filters require 7 full Grids and 1 Partial grid. This is a pack which includes 7 full grids & 1 partial grid.

Filter Area (Sq. Ft.). Grid Length Indentification Full Grid Part # Partial Grid Part # Full Grid Width Partial Grid Width
24 12" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1002
PL0180
PG1902 
PL0170
11 - 1/2" 9 - 1/2"
36 18" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1003
PL0181
PG1903
PL0171
11 - 1/2" 9 - 1/2"
48 24" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1004
PL0182
PG1904
PL0172
11 - 1/2" 9 - 1/2"
60 30" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1005
PL0183
PG1905
PL0173
11 - 1/2" 9 - 1/2"
72 36" American, Hayward, Pac-Fab,
Pentair, Sta-Rite
FG1006 PG1906 11 - 1/2" 9 - 1/2"

Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).

Mars

Mars

Product Specifications

Area:
48 sq. ft.
Top

?     Asked on 5/25/2012by Guest

Is this the correct grid for my Nautilus NS48 DE tank?
 Reply

A  Answered on 5/25/2012 by InyoPools Product Specialist Patrick P.

Yes these are the correct DE grids for the Nautilus NS48 DE tank
 Reply


?     Asked on 7/23/2012by Guest

I have a Hayward Filter, model DE4800. How many of these de grids will I need? And what is the mfg. number for the "short" grid?
 Reply

A  Answered on 7/23/2012 by InyoPools Product Specialist Patrick P.

The Hayward DE4800 filter takes 7 of the large grids part # FG1004 and one of the small grid part # PG1904. We do sell a de grid pack here which includes all 8 grids which is listed here on this page as part # PL0188  Thanks!
 Reply


?     Asked on 9/14/2012by Guest

What is the micron rating for a Unicel element?
 Reply

A  Answered on 9/14/2012 by InyoPools Product Specialist Patrick P.

All Unicel elements & grids have a 20 Micron Rating.
 Reply


?     Asked on 4/9/2015by Inyo Visitor

Will these fit the Pentair FNS Plus filter?
 Reply

A  Answered on 4/10/2015 by InyoPools Product Specialist Wes B.

Yes If  you have a Pentair FNS plus 48 sq ft filter these would be a correct replacement.
 Reply


?     Asked on 4/25/2015by Inyo Visitor

Will this product fit in a Purex Triton Nautilus FNS48 DE Filter?
 Reply

A  Answered on 4/26/2015 by InyoPools Product Specialist Patrick P.

Yes this DE Grid Pack will work on the Purex Triton Nautilus FNS48.
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

None

2     0

Needed new grid for filter

Written on 4/15/2020 by Guest

Ordered grid online Description of the product was helpful. The online instructional video was great demonstrating how to put it together as it was a bit tricky.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

When back washing we notice several grids were broken, dryrotted, so we knew we needed to replace.

Written on 7/24/2019 by Guest

Ordered a full set from INYOpools. So Easy and arrived before anticipated. Cheaper to order complete set than individually.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Wrench Set

2     0

large o-ring around middle of filter blowing out of its channel

Written on 6/5/2019 by Guest

At Spring startup, while vacuuming out the pool, the big o-ring between the top and bottom halves of the DE filter (Pentair FNS+4800) blew out of its channel with a big bang and an incredible fountain or water.

Several attempts at cleaning up, replacing with a new o-ring, but it kept happening. I noticed that after backwashing the pool would run ok until I started to vac.

Opened the filter and pulled out the grids and found them coated with clay. This was a weird winter where the usual 1 to 2 feet of snow were replaced with rainstorms that left three to four inches of mud, which had gummed up my filter.

I took the grids apart and thoroughly cleaned them, but it turned out that there was mud on the inside that I could not get out, so I ordered replacement grids, vac'd the pool to waste in order to get the clay out without further filter damage, assembled the grids and thoroughly cleaned everything and put iot all back together, now everything is working.

Three hints:
1. a 5/8" racheting wrench makes it a lot easier to get the band and clamp off and back on and also fits the drain plug. Be sure to watch a video about opening and closing the filter and carefully follow the instructions about hitting all the way around the band with a mallet once for every couple of turns of the bolt in the clamp

2. you need to lubricate the o-ring, like any O-ring. The easiest thing to do is to fill one hand with silicone lube and use the other hand to pull the o-ring through. WRONG this stretches the o-ring. instead, use your fingers to PUSH the o-ring through the lube.

3. it can be a little tricky to correctly position the grids on the bottom support. When done correctly, the backbone of each grid will rest directly on a little circle in the bottom manifold that provides support.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set, Wrench Set, Adjustable Wrench

Not Much Just Arranging

Written on 4/7/2019 by Guest

Opened top took out old grids. Installed new ones and put back together.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench, hose

Had DE entering my pool

Written on 8/2/2018 by Guest

I found DE entering my pool- which meant I had one or more bad filter grids. As it had been awhile since I had replaced any of them, I decided to just order a full new set. Process was simple, just disassemble filter , remove grids ( cleansed the ones I removed to see what shape they were in), decided to go ahead and replace with the whole new set, re assemble grids, reassemble filter, put on new o ring, close unit back up

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.93  out of 5 stars)
38 Rating
5 star:
 
(36)
4 star:
 
(1)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews