Details

Top

Part # NFC0760

Dimensions 7" L x 7" W x 14.75" D

Alternate Part #'s 15011, 17B1165, C7405, FC-0760, FC0760, XLS-7013, APCC7158, PBH-UM50-4, PLEPBH-UM50-4, PLEPBHUM50

Product Description

HIGH QUALITY POOL & SPA REPLACEMENT CARTRIDGES

  • Our generic replacement cartridges are less expensive than the original manufacturers' brands yet still meet the same high quality standards.  The key components of a cartridge - filter media, core, and end cap - are all designed for maximum water flow and cartridge life.
  • The filter media is point bonded polyester with even fiber distribution which results in an even dirt load and increased water flow.  
  • The Sharp & Uniform pleated media provides filtration area (square footage) that meets or exceeds the original manufacturers' specifications.  
  • An open core design provides sturdy support for the media without restricting flow.  Increased flow rates result in less wear on the pump and reduced energy usage.  
  • Anti-microbial end caps inhibit the growth of bacteria, mold and mildew while supporting the core and media.
  • Banded Pleats maximize flow during operation, and help to reduce the frequency of cleaning.  Banded pleats also make the cartridge easier to clean.
  • We carry thousands of generic cartridges to replace all of the most popular OEM brands such as Sta-Rite, Pentair / Pac Fab, Hayward, Purex, American Products, Jacuzzi,  Hot Springs, Coleman, and more.
Top End Cap Top End Cap
Bottom End Cap Bottom End Cap

Product Specifications

Manufacturer:
Baker Hydro
Filter Model:
Ultra-Mite 50
Diameter:
7 in.
Length:
14 - 3/4 in.
Top Style:
Handle
Top Inside Diameter:
Handle
Bottom Style:
Cone
Bottom Inside Diameter:
2"
Filtration Area:
50 sq. ft.
Media Weight:
4 oz.
OEM #:
17B1165
Unicel #:
C-7405
Filbur #:
FC-0760
Pleatco #:
PBH-UM50
Generic:
Yes
Top

?     Asked on 4/3/2019by Inyo Visitor

Hi, My parents have this skimmer in their pool since it was built in 1987, wasnt even aware that it had a cartridge. The pool is beyond green & in the process of replacing all needed parts b4 its emptied to start ovr. I obviously cant get the cartridge out now, so how can I figure out what size I need? This is what I got off the lid: HD HYDRO SKIMMER 51-252-117 basket info: Ht: 6 1/4" Base: 5" TOP OUTSIDE: 8" TOP INSIDE:7" Any info is so appreciated Thank you
 Reply

A  Answered on 4/3/2019 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, getting the measurements of the existing cartridge will be the only way to determine the correct replacement. 
 Reply