1. Home
  2. Pool Parts
  3. Skimmer Parts
  4. Baker Hydro Skimmer Hydro Pak
  5. NFC0780

$99.27

Qty:
 ADD TO CART

Details

Top

Part # NFC0780

Dimensions 7" L x 7" W x 29.375" D

Alternate Part #'s 17B1157, 17B1167, 19906, BAK0516737, C-7407, C7407, FC-0780, FC0780, PBH-UM100, PBHUM100, R173229, UNI605341, XLS-7015, 17-175-1120, APCC7275, PLEPBH-UM100, PLEPBHUM100

Product Description

HIGH QUALITY POOL & SPA REPLACEMENT CARTRIDGES

  • Our generic replacement cartridges are less expensive than the original manufacturers' brands yet still meet the same high quality standards.  The key components of a cartridge - filter media, core, and end cap - are all designed for maximum water flow and cartridge life.
  • The filter media is point bonded polyester with even fiber distribution which results in an even dirt load and increased water flow.  
  • The Sharp & Uniform pleated media provides filtration area (square footage) that meets or exceeds the original manufacturers' specifications.  
  • An open core design provides sturdy support for the media without restricting flow.  Increased flow rates result in less wear on the pump and reduced energy usage.  
  • Anti-microbial end caps inhibit the growth of bacteria, mold and mildew while supporting the core and media.
  • Banded Pleats maximize flow during operation, and help to reduce the frequency of cleaning.  Banded pleats also make the cartridge easier to clean.
  • We carry thousands of generic cartridges to replace all of the most popular OEM brands such as Sta-Rite, Pentair / Pac Fab, Hayward, Purex, American Products, Jacuzzi,  Hot Springs, Coleman, and more.
Top End Cap Top End Cap
Bottom End Cap Bottom End Cap

Product Specifications

Manufacturer:
Baker Hydro
Filter Model:
Ultra-Mite 100
Diameter:
7 in.
Length:
29 - 3/8 in.
Top Style:
Handle
Top Inside Diameter:
Handle
Bottom Style:
Cone
Bottom Inside Diameter:
2"
Filtration Area:
100 sq. ft.
Media Weight:
4 oz.
OEM #:
17B1167
Unicel #:
C-7407
Filbur #:
FC-0780
Pleatco #:
PBH-UM100-4
Generic:
Yes
Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers, Wooden Mallet

Replacing Wasted Filter - Unknown Model

Written on 4/23/2017 by Guest

The pool at my "new" old house was built in the 1970s. Had a yucky pleated filter in a partially submerged housing. I knew nothing about it. Fortunately, the pool guy that the previous owner hired helped show me the ropes, but he didn't know what kind of filter it was. I rinsed it (as best I could), let it dry, and took it to a pool supply place. After measurements and a little digging, it was identified. It took another week or so to arrive. Went through this same exercise at another retailer. Then I found Inyo!

Finding InyoPools.com was a huge breath of fresh air! My old pool came to life with Inyo's help. An independent pool supply shop helps me a great deal also. I like to support local business, but the difference in price and quality for this big 100' filter, made Inyo my definite supplier. I order it and it shows up, no problem, easy! The InyoPools.com site is a great resource for information. I am truly grateful.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
(0%) 0 of 1 customers would recommend this product to a friend.
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review