By Zodiac
Part # 6100-07
Manufacturer Code 2711
Dimensions 0.47" L x 0.45" W x 0.33" D
I need a 3-way splitter to control 3 actuators off of the same valve control. Your previous answer did not answer my question. Thanks!
Reply
Hi, Kalen. Unfortunately, you're unable to operate three actuators using only one actuator relay. Each actuator will have to be wired to its own relay.
Reply
Hello:
Do you have this same connector with just two pins?
See photo.
Thanks!
Hi Thomas, Could you let us know what is on the other end of the connector? For example, what are the red and black wires going to, are they going to a valve actuator? Also, could you let us know which control system you have, for example, a Jandy AquaLink, Goldline Controls, Pentair, etc.. Simply click the reply link below to submit your reply and hopefully we can find these for you.
Reply
Is there a specific tool required to connect these to the wiring? If not, how are they connected?
Reply
You would use universal crimping pliers to attach connectors to the wire. Then you would be able to connect the wires to the 3-pin connector.
Reply
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-19c9dde5-9146-47a0-b1b1-cccb8f8ee75d.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Zodiac Connector (2711)")
-19c9dde5-9146-47a0-b1b1-cccb8f8ee75d.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Zodiac Connector (2711)")