$601.98

Qty:

By Pentair Pool Products


Details

Top

Part # 192326

Dimensions 28" X 15"

Alternate Part #'s 192326, 4600-65B, PAC0512939, _192326, PAC-051-2939, PEN192326

Product Description

This is the complete DE grid assembly used on the follwing Pentair, Purex, Pac-Fab and American Products 48 Sq. Ft DE filters.

  • Nautilus Plus NSP-48 Filter
  • Nautilus NS48 Filter

The DE grids on the 48 Sq. Ft. filters measure 24" in length. This is the complete pre-assembled grid assembly which includes 8 DE grids, top manifild, bottom manifold, air relief strainer, extension and tie rod.

Top

?     Asked on 1/25/2016by Tim

I have a pac fab nautilus nss-48 stainless de filter. Is this the correct grid assembly? Does it come with a new down tube and new down tube o-ring?
 Reply

A  Answered on 1/26/2016 by InyoPools Product Specialist Megan C.

Hello, Tim. Yes, it is the correct grid assembly.  The part# 192326 Grid Assembly - Ns48 48 Sq Ft  for Pac-Fab Nautilus Stainless D.E includes 8 DE grids (key#10x7 and key#9x1), bottom manifold/retainer grid (key#28),top manifold (key#7), air relief strainer (key#34), extension and tie rod (key15). Please refer to the parts diagram on page http://www.inyopools.com/pool_parts_pac_fab_nautilus_stainless_d_e_.aspx or click here.
 Reply


?     Asked on 1/26/2016by Tim

Which pipe assembly (part # 13 on the parts diagram) is required for the part# 192326 Grid Assembly - Ns48 48 Sq Ft for Pac-Fab Nautilus Stainless D.E filter?
 Reply

A  Answered on 1/28/2016 by InyoPools Product Specialist Lennox H.

Hi Tim, You would need the Piping Assembly, Upper Sh400 (194983), unfortunately this part is no longer available and there is not replacement.
 Reply


?     Asked on 5/6/2019by Tony

Hi, I have a Pentair FNS48 Filter that is approximately 15 years old. The grids all appear to be holding up fine but are not holding DE - it's coming back into the pool. Pic attached showing filter prior to back-washing with many grids with little to no DE attached. Is there a life expectancy to the grid material? I don't see any cracks in the manifold or pipe etc. Any suggestion on what may be causing this? Thank you

 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Patrick P.

Hi Tony, we normally see that DE grids will last about 5 years so if you still have the original grids then it would definitely time for a new set of grids.
 Reply


?     Asked on 5/29/2019by Shane

Hi I have a Crystal Water 48sq ft filter would this be the correct replacement filter grids I would need?
 Reply

A  Answered on 10/4/2019 by Industry Professional

Yes, it is the correct complete grid assy.
 Reply


?     Asked on 6/4/2019by Joseph Scarantino

Will this assembly fit a Nautilus Stainless Steel Ns-48 filter?
 Reply

A  Answered on 6/4/2019 by InyoPools Product Specialist Patrick P.

Hi Joseph, yes this DE Grid assembly does fit a Nautilus Stainless Steel Ns-48 filter.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

3     0

My Stainless steel DE filter looked brand new on the outside but the filter and assembly was falling apart

Written on 6/27/2017 by Guest

My step by step instructions are as easy as can be . We took out the old filters and manifold and dropped in the replacement from inyopools. It fit like a glove. I couldn't be happier. Thank you inyopools

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews