Part # 5111-07H
Manufacturer Code SPX1580CH
Dimensions 3.5" L x 3.5" W x 2" D
Impeller 1.5 THP - SPX1580CH
My pump is very loud, it has good pressure. Could this be the impeller?
Reply
If you pump is loud, then that means the motor bearings are wearing out and would need to be replaced or you would need to replace the motor.
Reply
My pump stopped moving water all of a sudden. There are no blockages, or air pockets. The water move very slowly and will not operate my automatic vacuum at all. It started off good until yesterday, then all of a sudden, no pressure. I think indicates the impeller, but what other parts will I need to replace it?
Reply
Hi Brutuss100, The low water flow and suction can be caused by a dirty filter since the pump is not clogged. If you want to try replacing the impeller I will also recommend that you replace the shaft seal and the o-ring.
Reply
The Most Recent Reviews
(3 out of 5 stars)
Reviewed By: Cynthia B. from Vinita, OK ()
I had to return as we did not order correct size.
Was this review helpful to you?