$103.40

Qty:

By Hayward Pool Products


Details

Top

Part # 4820-63

Manufacturer Code SP0727

Alternate Part #'s SP0727, SP727, 26-150-1027, HAY-56-4140

Product Description

For heavy spring clean-ups, we recommended using a Hayward SP0727 diverter valve to bypass the filter and accelerate the clean-up process. The SP0727 can be used with PerFlex, ReGenex and XStream filters. This valve has 3 ports on it, the valve would screw into the disharge side of your pump and you can have the handle turned so the return water goes through your filter or you can turn the valve in the opposite direction so the dirty water goes to waste and bypasses your filter, this is very helpful when vacuuming or for heavy spring clean up.

Top

?     Asked on 5/2/2013by Guest

Do you sell a replacement nut for the Hayward SP727 valve?
 Reply

A  Answered on 5/2/2013 by InyoPools Product Specialist Patrick P.

Yes, you can find the nut here: http://www.inyopools.com/Products/07501352027853.htm
 Reply


?     Asked on 9/19/2014by Guest

Can this valve be used on a perplex ec75 for an in ground pool. It says on Hayward's site for above ground pools
 Reply

A  Answered on 9/19/2014 by InyoPools Product Specialist Patrick P.

Yes this can be used with in ground pools. The Perflex is most commonly (in smaller sizes) used in above ground pools. So I'm sure that's what they were referring to.
 Reply


?     Asked on 6/5/2015by bill

do you need extra parts to install unit or will the unit go on a ec 65 system 3.. looks as if need more fittings and pvc pipe...........
 Reply

A  Answered on 6/15/2015 by InyoPools Product Specialist Lennox H.

Bill, It all depends on what you're doing, but extra materials will be required.
 Reply


?     Asked on 9/9/2015by Inyo Visitor

I have a Haywood ec65 with fingers.Is there an upgrade to use a diverter valve instead of the bump to make it easier and clean the fingers better?
 Reply

A  Answered on 9/14/2015 by InyoPools Product Specialist Lennox H.

Hi, The "Bump" feature is the only way to backwash the Hayward Perflex filters. The Perflex XStream & Regenx Diverter Valve WG 1.5" (SP0727) is a valve that can be install so that you back vacuum or drain you pool without going through the filter.
 Reply


?     Asked on 7/20/2016by Eric

I have a Hayward regenx with a RG70 grid filter but do not have a backwash valve which one should I get? Thanks.
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Alan M.

Hello Eric, This valve is a diverter valve to bypass the filter, but is not considered a "backwash" valve. The backwash feature on DE/Sand filters removes the dirty water from the tank and expels it through a waste line. This valve would screw into the discharge side of your pump and you can have the handle turned so the return water goes through your filter or you can turn the valve in the opposite direction so the dirty water goes to waste and bypasses your filter.
 Reply


Top

Review Summary

 (Average 4.75  out of 5 stars)
4 Rating
5 star:
 
(3)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews