By Aqua Products


Details

Top

Part # 3288-045

Manufacturer Code A4400PK

Dimensions 2.35" L x 2.35" W x 1.2" D

Alternate Part #'s 4400, 87-131-2145, AP4400

Product Description

Propeller - 4400

Top

?     Asked on 3/30/2018by richard wayne neudigate

how do you change the propeller 4400
 Reply

A  Answered on 3/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Richard. Depending on the cleaner you have, you will remove the outlet cover by undoing the screws. Then pull the propeller off the pump shaft and press the new propeller on. 
 Reply


?     Asked on 5/28/2021by Sharon veatch

does the 4400 plastic propeller fit a aqua clean robotic pool cleaner
 Reply

A  Answered on 5/28/2021 by InyoPools Product Specialist Patrick P.

Yes this is the correct replacement impeller for the aqua clean robotic pool cleaner
 Reply


?     Asked on 7/22/2021by Jeffrey Hill

what propeller will fit an aquabot turbo classic since the 4400 propeller has been discontinued?
 Reply

A  Answered on 7/23/2021 by InyoPools Product Specialist Craig C.

Hello Jeffery.  Changes to US based Aquaproducts and Israeli based Aquatron have resulted in some confusion in the industry.   Currently, the best course of action is to contact Zodiac/Aquabot at phone 1-862-269-9269, extension 3169 for assistance.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

3     0

Unit would not climb the walls

Written on 6/22/2019 by Guest

I pulled the unit from the water found that the impellers were dry rotted and snapped off order new impeller. I removed the 3 screws on the impeller cover inserted a small stew driver and applied light pressure up on the remainder of the broken pc. Installed new impeller and replaced cage back over the impeller with the 3 screws tested the unit in the shallow end of the pool unit climb the walls as it should.

Were these instructions helpful?