By Hayward Pool Products
Part # 9376-05
Manufacturer Code SPX1434JA
Jet Air III Gasket/O-Ring Kit - SPX1434JA
hello. can you tell me how to install spx1434ja seal and o rings, onto sp1434pakb? I have the key to install the jet, I just dont know where the rubber o ring goes, and where the plastic seal goes when installing. there are 2 plastic seals, and 1 rubber o ring--thanks
Reply
John, There is a groove in the middle of the jet where it would fit tight inside the opening flush with inner lining. and the seals sit under the lock rings.
Reply
hello, I received an answer, but am still confused. I have SP1434pakb spa jets. I have spx1434ja seals and O ring. where does the rubber O ring go? that was not answered. are both plastic seals used? does one plastic seal go into bulkhead first, then the spa jet, then another seal, then the threaded lock ring? I am very confused and there are no manuals showing. thank you
Reply
Hello John, Can I suggest an online search with youtube for tutorials that may help you out I searched hayward spa jets and found a few
Reply
The kit comes with 2 plastic seals does each jet need 2 seals? Where do they go? Does one seal go behind the spa jet assy before you put it in and does the other seal go behind the threaded locking ring or does each key und only one seal behind the locking ring?
Reply
See the image we added. This kit has 1 o-ring that only works on the back of the key # 2 nozzle. The 2 plastic seals ( key # 7) are wall fitting gaskets. What o-ring are you actually looking for?
