Part # 5140-23
Manufacturer Code 2920060603
Dimensions 1.25" L x 1.25" W x 1.25" D
Seal Assy F/E71 E91 E90 E440 E-75 - 2920060603
what are the dimensions of the pump seal for speck pump E71 pool pump
Reply
Hi Bob, Here is an image with all the dimensions for the speck E71 shaft seal.
Reply
I have a speck E-90 pump how do I take it apart to change the seal assy (Part#12) in diagram. I was able to remove the 8 screws and changed O-ring but that's where Im stuck on how to get to this part.I have a leak coming from the bottom of the pump and was advised to buy this part.
Reply
You will need to remove the impeller by first taking off the diffuser which sits right over it. Then you will need to hold the shaft steady by using a wrench on the back side of the motor holding the rear of it still enabling you to unthread that impeller. Here is our "How to replace a pool pump impeller" how to guide video which will give you a general concept of how to remove it.
Reply
The Most Helpful Review
1 0
(5 out of 5 stars) Seal fits, no leaks
Reviewed By: Edward C. from Kingwood NJ ()
Pros: No leaks
Cons: None
The hard part was getting the impeller off. I couldn't the screw in back of the motor so I had to take the rotor out to hold the magnets.
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) seal gasket for inner seal of pump
Reviewed By: KAL8898 from Kendall Park, NJ ()
Pros: works
Cons: none
This seal gasket for the inner seal of my Speck E-71 pump worked just fine. This was the first time I ever took apart my pump to change the seals & it went fine. Took about 45 min's from start to finish.
Was this review helpful to you?