By Pentair Pool Products
Part # 4678-51A
Manufacturer Code 072523
Dimensions 5" L x 1" W x 1" D
Pentair Ortega 072523 Check Valve 1lb Spring
I'm needing to replace the seat assembly p/n 073502, on my pool and spa. Two different springs are shown, p/n 072523 1lb, and 072524 3lb. Which spring is correct for use on spa to prevent back flow.
Reply
Good morning, Rusty, the 1lb spring should be fine. Depends on the line run and how many feet below the equipment sits. The only thing against you is gravity.
Reply
Less than 1 hr
Adjustable Wrench
Shut off pool pumps
Block flow with shut off valve
Unscrew Check Valve Cover
Remove spring and poppet
Check housing for defects
If defective you will have to replace the housing
If None: insert new Poppet
Replace "O Ring" in Check Valve Cover
Place new spring on Check Valve Cover and screw in place
Turn on pool pump and check for leaks
If leaking remove cover and ensure "O Ring" is correctly installed
Place new spring on Check Valve Cover and screw in place
Turn on pool pump and check for leaks
If leaking repeat steps above