$83.42

Qty:

By Pureline


Details

Top

Part # 4802-01CP

Manufacturer Code PL0714

Dimensions 9" L x 8" W x 15" D

Alternate Part #'s 27515-154-000, 39-2585-09-R, 39258509R, DVK-7, Pl0714, SP071113, SP0714T, SP0714TC, TM-12-H8, TM12H8, 27515154000, CMP27515154000

Product Description

Is your backwash valve leaking?

Why spend 30% for the Hayward original when you can get an after market valve at the same quality!

This is a replacement top mount backwash valve which is a direct replacement for the Hayward SP0714T & SP711-13 valves as well as the Jacuzzi DVK7 valve.

The Hayward SP0714T & SP711-13 valves are commonly used on the following Hayward Pro Series Sand Filters: S166T, S180T, S210T, S220T, S244T & S270T. 

The Jacuzzi DVK7 valve is commonly used on the following Jacuzzi Laser Sand Filters: 160L, 190L, 225L, 250L please note that the Jacuzzi Laser had two style valves a bolt on style and a clamp on style this is the clamp on style. The bolt on style valve is far more common and can be found here Jacuzzi Laser bolt on style valve

Valve does include the pressure gauge.

Product Specifications

Plumbing Size:
1.5 in.
Diameter:
8 in.
Flange:
Clamp Style
Top

?     Asked on 9/26/2014by Guest

The handle is hard to turn. Any ideas?
 Reply

A  Answered on 9/26/2014 by InyoPools Product Specialist Patrick P.

You may need a new spring or to check the gasket inside. There are also plastic washers under neath the handle that make turning it a little smoother. Those do dry out and crack. This is a parts explosion that shows the pieces - http://www.inyopools.com/pool_parts_multiport_valve_2_models_sp715_sp716.aspx
 Reply


?     Asked on 5/18/2015by Inyo Visitor

My sand filter says splash pak ss185, it is a clamp on valve, is part #480291cp the right valve?
 Reply

A  Answered on 5/18/2015 by InyoPools Product Specialist Patrick P.

Yes this is the correct replacement valve for the Splash Pak SS185.
 Reply


?     Asked on 5/21/2015by Matt

This looks like the part I need The only thing I know is that its a Hayward and there's a number on it (27-2599 6/98) If I were to order this from you and it does not fit correctly, Can I send it back for a refund?
 Reply

A  Answered on 5/21/2015 by InyoPools Product Specialist Patrick P.

Hi Matt, The part # of 27-2599 is the part # for a label which goes onto a Pac-Fab or Purex Valve and these valves are different than the Hayward valve. Is it possible you could get the name of the filter or model #, this should be located on a label on the side of the filter tank. You could also reply back to our email with photos as this would help us determine the valve you require.
 Reply


?     Asked on 5/30/2015by John

I have a "Splash Pak SS160" from Jacuzzi Bros sand filter. Is this the correct replacement multiport valve?
 Reply

A  Answered on 5/31/2015 by InyoPools Product Specialist Patrick P.

Hi John, Yes this valve is the correct replacement valve for the Splash Pak SS160 from Jacuzzi Bros.
 Reply


?     Asked on 6/4/2015by John

Where can I purchase the fittings for the three ports of this Valve? I just purchased a new Hayward Sand Filter (SP210 Pro Series) and I need the fittings to hook up the hoses from the pump, the return, and the waste.
 Reply

A  Answered on 6/4/2015 by InyoPools Product Specialist Andy O.

John- For the Hayward Generic Valve For Hayward Sand Filters 4802-01CP you can use a Combo Hose Adapter (SPX1091Z7) 31-150-1030 to screw into the ports of the valve and clamp down your hoses to.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers

0     1

It was cracked and not working.

Written on 6/11/2021 by Guest

Used a pair of pliers twisted off and replaced with new one hooked up the quick attached wires bam done.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

3     0

My husband broke the handle at the end of the season while closing up the pool.

Written on 6/26/2018 by Guest

He purchased a new handle and once we opened the pool this year, he attempted to attach the new handle. He is not a handy person and this replacement handle cost half as much as replacing the entire valve. From day one, the leaks we're massive. After a few weeks, I purchased the replacement value from your company. It came quickly. My husband replaced this one piece valve without incident and we have been leak free since!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers, Wrench Set

0     1

Replacement valve cracked

Written on 2/10/2018 by Guest

Just installed the new one, very easy

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers

1     0

Leak out waste port

Written on 6/26/2017 by Guest

Remove the Hayward valve and replaced with generic valve. Generic valve works great. Hayward valve had built in gasket that couldn't be replaced.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.16  out of 5 stars)
13 Rating
5 star:
 
(8)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(2)

The Most Recent Reviews