Part # 5650-40
Manufacturer Code 05-632
Dimensions 2.45" L x 2.45" W x 0.55" D
White plastic recessed mounting washer with cap used on some S.R. Smith diving boards. This washer/cap assembly covers the head of the carriage bolt that mounts the board to the base. The S.R. Smith logo is molded into the washer. Outside diameter is 2-7/16". This is a single washer/cap.
This part is also included in the Mounting Hardware Kit 67-209-911. (Kit includes one pair.)
Are you serious? Another sight has 2 for what you are asking for one. Way way over priced. WHY?
Reply
Pricing is determined by the current market. Some retailers I have researched have higher pricing for this item, while others may have theirs on clearance pricing.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Original equipment to freshen up my old weathered hardware
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Hard to find products are available with inyopools
Was this review helpful to you?
(5 out of 5 stars) Diving Board Washer
Reviewed By: Robert F. from Inwood, WV ()
Pros: Cheaper than kit
Better price than the kit w/bolts and nuts. Do not tighten completely until you have placed the cap on. Works much better. When you tighten and then install covers they will be difficult to install.
Was this review helpful to you?
(4 out of 5 stars) As advertised
Reviewed By: Ryan R. from Houston, TX ()
Pros: Only buying what I needed.
Cons: Shipping is costly for the small piece.
I purchased this piece so that I can replace the worn plastic on my diving board. This was the only place that I was able to purchase just the plastic part, everywhere else was the kit which included the bolts and nuts to hold the board to the base.
Was this review helpful to you?
1 0
(5 out of 5 stars) Perfect Parts
Reviewed By: Randall V. from Little Rock, AR ()
Pros: Perfect fit
Cons: none
I was able to purchased the White Plastic Recessed Mounting Washer w/cap without the bolts and saved a bunch! Went to hardware store to buy the 4" bolts/washer/nuts and it worked great. Thanks INYOUpools for making this part available!
Was this review helpful to you?
1 0
(5 out of 5 stars) Diving board cap
Reviewed By: trick1 from Oceanside, CA ()
Fast delivery. Looks like it's a quality product
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: BRUCE W. G. from BAIE D'URFE, QC ()
Pros: Quick delivery
Cons: Shipping cost high
Lots of good product selection; quality is good. Shipping costs were much higher than expected.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Victor from Thousand Oaks, CA ()
Pros: perfect replacement part
Cons: shipping cost is excessive for a small part
This part was a perfect fit and easy to instal
Was this review helpful to you?
2 0
(5 out of 5 stars) Matched Existing Diving Board Perfectly
Reviewed By: Swimdad from Hendersonville, TN ()
Pros: Easy to install, perfect match
Cons: none
The recessed mounting washer and cap was easy to install and matched the original perfectly.
Was this review helpful to you?
1 0
(5 out of 5 stars) Diving Board Part
Reviewed By: Troy D. from Lakeville, MN ()
Pros: Great fit!
Cons: None!
It was great being able to order this cap by itself. Cleaned up the look of the diving board.
Was this review helpful to you?
1 0
(5 out of 5 stars) Diving board anchor bolt covers
Reviewed By: Robert A. from Salina, KS ()
Pros: They look great
Cons: none
These covers replaced the old ones perfectly
Was this review helpful to you?
1 0
(3 out of 5 stars)
Reviewed By: Jerry H. from Dallas, TX ()
Item was fine, but the shipping cost was totally out of line - could have been shipped for less than $1.00.
Response From INYOpools.com: In the future on parts orders if you purchase more than $20 with of parts the shipping is FREE.
Was this review helpful to you?
(5 out of 5 stars) easy to install relplacement parts
Reviewed By: Curtis H. ()
This product was super easy to install and gave my old diving board a new finished look that I was hoping for. Thanx inyo of coming through again !
Was this review helpful to you?
2 0
(5 out of 5 stars) Exactly what I needed
Reviewed By: Diana F. from New City, NY ()
Cons: Pricey
This is exactly what I needed and looks 100% better then the last one I had on the diving board.
Was this review helpful to you?
2 0
(5 out of 5 stars) diving board mounting washer
Reviewed By: sheseams from Manchester, NH ()
Pros: Looks great
These new plastic mounting washers give my pool a newer look. The old ones became rusty looking over twenty years. I am most happy!
Was this review helpful to you?
1 0
(5 out of 5 stars) Mounting Washer
Reviewed By: JB11 from Washington, DC ()
Good replacement part.
Was this review helpful to you?
2 0
(5 out of 5 stars) White Plastic Recessed Mounting Washer
Reviewed By: Bigrick from Vienna, WV ()
Pros: Great item & hard to find!
Cons: None
These work great for my 3 hole diving board. I could not get any dimensions on this item before ordering. I could not reach a real person at SR Smith and this item was not listed on their support site. I took a chance and ordered them anyway and they fit. It would be nice if you listed the OD, ID for the bolt head and the bolt size. Could save a lot of returns!!
Was this review helpful to you?
2 0
(5 out of 5 stars) Perfect replacement
Reviewed By: STEVE from Dayton, OH ()
Pros: Prompt service
I was very pleased to be able to purchase the mounting washer separately without buying the nuts and bolts.
Was this review helpful to you?
(5 out of 5 stars) Diving Board Washers
Reviewed By: Va Beach Local from Virginia Beach, VA ()
Pros: Fast Shipping
Cons: None
Was this review helpful to you?