$105.56
Part # 3269-12
Manufacturer Code AX6009B
Hayward Phantom Rear Wheels W/ Bearings Nuts & Hubcaps
Less than 1 hr
Screwdriver, Adjustable Wrench
Replacing the wheels is quite simple.
1. Pry off the hubcap.
2. Wrench off the large black nut.
3. Remove wheel, bearings and spacer, taking note of the direction and order of these parts were removed.
4. Replace the black spacer, small end should be body first.
5. Insert the bearings in the wheel, taking note of notches fit in grooves.
6. Insert nut into bearings also using the groove and notches.
7. Replace the wheel assembly on the axle tighten the nut, not too tight.
8. Replace hubcaps noting there is a left and right side.
The Most Recent Reviews
(5 out of 5 stars) Look New Wheels!
Reviewed By: Inyo Customer ()
While I have owned my Hayward Phantom for many years, this is the first time I’ve needed wheel replacement. Over time the hubcaps have broken off, and the plastic wheel tread (which are flat and maybe 3/32 thick new) have worn a rounded edge where the tread actually was so thin and separated from the wheel body. These new wheels should last for many years to come.
Was this review helpful to you?