$381.10

Qty:

By Hayward Pool Products


Details

Top

Part # 5110-071

Manufacturer Code SPX3100AAZ

Dimensions 12" L x 9.5" W x 11" D

Alternate Part #'s SPX3100AAZ, 35-150-3009, HAY-101-1210, HAYSPX3100AAZ, HPPSPX3100AAZ

Product Description

PUMP HOUSING STRAINER, 1-1/2"" With DRAIN PLUGS

Top

?     Asked on 9/13/2015by Gus Karouta

1. Does the housing comes with strainer and strainer cover and the two special cover bolt and nuts or do I need to order these separately / re-use the old ones if they are still good? 2. the 1.5 or 2" drain plug dimension, is it measured on the inside or on the outside? Is there a phone number I can call? Thanks
 Reply

A  Answered on 9/17/2015 by InyoPools Product Specialist Lennox H.

Hi Gus, The Pump Housing Strainer, 1-1/2"" W/drain Plugs does not come with any other parts, they will have to be purchased separately or reuse the existing parts if still in good condition. The 1-1/2 or 2" strainer housing both have 1/4" MPT drain plugs. You can reach us at 877.372.6038.
 Reply


?     Asked on 11/13/2017by Gary

Just got a ST 1102 motor from INYO and works great. Now I need a pump housing for a hayward super pump II . No markings on the housing but a pat. No. 299143. It's a 1hp with 1 1/2 pipe size. It takes SPX 3100D stainer twist cover, spx3020E seal plate, spx 3007C impeller and a sp3000 BN diffuser. It looks like your spx3100aaz. Not sure what aaz is. thanks for any help . Gary
 Reply

A  Answered on 11/13/2017 by InyoPools Product Specialist Lennox H.

Hi, Gary. This Pump Housing Strainer - SPX3100AAZ is the correct replacement based on the info provided. 
 Reply


?     Asked on 4/19/2020by Fred Cruise

I currently have a Hayward pump housing SP3007X10AZ with a leak on the bottom of the unit. Can you tell me what the replacement housing part number is? The attached pump motor (UST1102) works fine (bought from you in 2015).
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Hector F.

Hi Fred, this is the correct housing for the Hayward Super II pump model SP3007X10AZ that uses 1.5-inch ports. The housing that has 2-inch ports is part number 5110-072
 Reply


?     Asked on 5/15/2021by Frank Nasso

hi, I have an existing pump model SP 3007x10. The housing you show (sp-3000-AA) as the replacement does not show the molded side brackets that hold the hand knob securing the strainer cover.. How is the strainer cover held in place on the unit you show? Thanks Frank
 Reply

A  Answered on 5/18/2021 by InyoPools Product Specialist Patrick P.

Hi Frank, The strainer cover screws in, and this secures the cover into place.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews