By Hydro Quip
Part # 9219-002
Manufacturer Code PH100-15UP
Dimensions 10" L x 6.25" W x 4.25" D
THIS IS A HYDRO QUIP JETTED TUB HEATER PURE HEAT MODEL PH100-15UP THIS IS A T-STYLE HEATER DESIGNED TO MOUNT ON THE TOP OF A STANDARD BATH TUB PUMP THE END AND BOTTOM CONNECTIONS ARE STANDARD 1-1/2" UNION THREADED - (ACTUAL OUTSIDE DIAMETER OF THE THREADS ON THE TAILPIECES IS ABOUT 2-1/2") DIMENSIONS: LENGTH: 7" (LENGTH OF THE HEATER TUBE FROM FLANGE TO FLANGE) HEIGHT: 3-3/4" (APPROXIMATE - FROM BOTTOM FLANGE TO TOP) DEPTH: 4-1/2" (APPROXIMATE - FROM FRONT OF BOX TO REAR) THE BOX MOUNTS OF THE FRONT OF THE HEATER TUBE INCLUDES: HEATER WITH (3) SETS OF UNIONS EACH SET OF UNIONS INCLUDES (2) TAILPIECES) UNION SET FOR 3/4" PIPE, 1" PIPE, AND 1-1/2" PIPE ARE INCLUDED (2) UNION GASKETS WITH BUILT IN O-RING FOR END CONNECTIONS (1) UNION GASKET FOR BOTTOM CONNECTION 3 FOOT NEMA 3-PRONG CORD ALREADY INSTALLED (1) 6 FOOT SECTION OF #8 AWG SOLID COPPER BONDING WIRE
hat is the bonding wire that's mentioned. Is that like a Ground wire? Where would that connect to. I realize that it's for safety but not sure where that would connect. The pump motor has a similar connecter on it.
Thank you
Scott
Reply
Hello Scott. The Bond Wire would be connected to the external fitting on the underside of the pipe assembly. The Bond Wire provides an external connection between multiple conductive components that are not intended to carry electrical current. A Bond Wire can connect multiple components (pool equipment, screen enclosure). One end of the Bond Wire is connected to a grounding conductor. Not to be confused with the ground wire of electrical systems.
Reply
