$1,133.42
By Pentair Pool Products
Part # 5057-160
Manufacturer Code 350821
Drive Assembly Intellipro Vs 3050 Kit Black (350821). This is the older style which has no digital display.
my looking at display sometimes cloudes up and cannot read display after turning off unit then it works
Reply
1. Be sure that the communication cable is connected at both ends. 2. Check that the pump local address matches with the address used in the IntelliTouch control system. 3. Check that the pump has been assigned a circuit name on the IntelliTouch control system. 4. Ensure that the pump display says “DISPLAY NOT ACTIVE”. A defective device on the network can inhibit the proper operation of other network device. Devices should be disconnected sequentially until the network starts working.
Reply
