Model # S220-2
Sunheater 2' x 20' Solar Heating System for Aboveground Pools
 |
Why purchase a Pool Solar Heating System from Inyo? |
Lowest Prices on Solar Pool Heaters Guaranteed!
No need to wonder if you are getting the best price on your Pool Solar System! Find a competitor with a lower shipped price on the same product and we'll beat the price! Simply contact us with the competitor's website and product information and we'll BEAT their price! If we are unable to beat the competition's price, we will send you a reward code for $10 off your next purchase of $50 or more.
Largest Selection of Pool Solar Heaters
Inyopools carries the largest selction of pool solar heaters on the web, check out our full line of Above Ground Pool Solar Heaters here and our Inground Pool Solar Heaters here. We also carry this Solar Pool Heting System in 4' x 20' Model.
Sunheater 2' x 20' Solar Heating System for Aboveground Pools
• Raises Pool Water Temperature 10° F (6° C) or More
• Simple Do-It-Yourself Installation
• Uses Existing Pool Pump
• Tube on Web Design for Maximum Exposure to Sun's Rays
• No Fuel or Electricity Bills or Expensive Installation of Equipment and Connections
• Easy to Drain for Winterizing
| Pool Size | No. of S220 SunHeater Systems | BTU Rating |
| 12', 15' & 18' Round | 1 | 40,000 BTU |
| 21' & 24' Round | 2 | 80,000 BTU |
| 27' & 28' Round | 3 | 120,000 BTU |
| 12' x 24' Oval | 1 | 40,000 BTU |
| 15' x 30' Oval - 16' x 25' Oval | 2 | 80,000 BTU |
| 16 x 32' - 18' x 34' Oval | 3 | 120,000 BTU |
Product # S220 Kit Components Include:
| Qty | Item# | Description |
| 1 | SCPNL220 | 2’ x 20’ Polypropylene Solar Collectors |
| 1 | SC018HSE | 18’ Plastic Flex Hose |
| 1 | SK-32* | System Kit for S220 |
*SK-32 System Kit Include: 2 Elbow connectors, 2 PVC end caps 1 1/2" Female Pipe Thread, 2 1 1/4" Steel Hose Clamps, Teflon Tape 1/2", Installation Manual w/ Warranty
Includes: One 2' x 20' polypropylene collector, two elbows/hose-connector adapters, two end caps, one connector hoses for second collector, two stainless steel clamps, 1 roll of Teflon tape, installation/operation manual.
Note: Photo above depicts a 2-panel installation. This model (S220) includes one panel only.
Caution: Photo for presentation purposes only. Do not install system close enough to pool to allow children to use it to climb into the pool.
How Solar Pool Heating Works
Why Solar Heat Works Best
My pool gets really warm in the summer. Is there an option to bypass the heater without having to disconnect it?
Reply
With any pool heating unit, installers usually install a bypass valve to bypass the heating unit when not in use.
Reply
I have a 12' x42" steel sided above ground pool. I live in south Florida and have very mild winters but the pool gets too cold. It looks like I would only need one of these systems to heat my pool, is that correct? How far away from the pool can we put the panel? can it be put on the roof? What can we expect for a degree change?
Reply
Hello Lisa, with this type of system you would want to mount this beside the pool, and temperature change • Raises Pool Water Temperature 10° F (6° C) or More depending on direct sunlight hitting the solar panel. Please make sure to go through details and product description on everything you are getting with your Solar Heating System.
Reply
What size header does this solar panel use? I'm looking for a 2inch header to reduce the back pressure. Also do these panels have the little plug in the middle of the header to divert most of the water up through one side of the panel and down to the other?
Reply
Hello Dave- These are going to connect with 15" pvc. As for the black plug, from looking at the installation manual it goes through one end, all the way down and back and up to the next heater until it goes to the return for the pool. Here is a link to the manual: http://images.inyopools.com/cloud/documents/smartpools220.pdf.
Reply
