$386.91

Qty:

By Aqua-Flo


Details

Top

Model # AF021150001010

Dimensions 15.5" L x 8.5" W x 6.5" D

Alternate Part #'s 34-402-5008

Product Description

Aqua-Flo by Gecko's Flo-Master HP pumps are designed with a unique, high-performance impeller providing flow rates that exceed all tested competition. Ideal for larger, multi-jetted tubs or similar applications requiring greater output. Each pump is engineered with careful attention to detail and accuracy.

Spa Pump Features:

  • Long life shaft seal
  • Built-in overload protection
  • Reinforced engineered plastic construction
  • Adapts to hair and lint traps for self priming aplications
  • Stainless steel volute fasteners
  • Available in one or two speed models of 0.5hp, 0.75hp, 1.0hp, 1.5hp, or 2.0hp (SEE THE AVAILABLE STYLES TAB)

  • California Title 20 Compliant


In 2012, the manufacturer changed the way Aquaflo pumps are rated. These pumps are now assigned both an operational horsepower (ohp), and a total horsepower (thp) rating. Previous versions of these pumps used only the operational horsepower. If you are replacing an older Aquaflo pump, be sure to match the operational hp rating rather than the total hp.

 

Manufacturer AquaFlo/Gecko
Pump Model FMHP
Speed 2 Speed (2-Spd)
Motor Voltage 115v
Drain Plug Location 6,9 o`clock
Suction Style Center
Suction Connection Type Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Suction Pipe Size 1-1/2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 1-1/2"
Horsepower 1.5hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 13.3A/4.1A

Product Specifications

HP:
1.5 HP
Manufacturer:
AquaFlo/Gecko
Pool / Spa Type:
Spa
Volts:
115 V
Speed:
Dual
Amps:
13.3/4.1
Frame:
48
Intake Port:
1.5 in.
Discharge Port:
1.5 in.
Pump Model:
Flo-Master FMHP
Discharge Location:
Side
Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Sawzall, pvc fittings, glue and primer

Failed jet pump on an old hot tub

Written on 9/30/2020 by Guest

Turned off all power
Removed original unions
Removed electrical connection
Set new pump in place of old one
Old pump used 2inch plumbing
We needed a pump ASAP and this pump was the best option but used 1-1/2 plumbing
We cut off the original plumbing union and tied the new pump union in by utilizing a reducer bushing
Reinstalled the electrical
Filled the hot tub back up and it worked flawlessly!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews