1. Home
  2. Valves
  3. All 2-Way Diverter Valves
  4. 25922-154-000

By Custom Molded Products

Details

Top

Part # 25922-154-000

Dimensions 9" X 5-7/8"

Alternate Part #'s CMP25922154000

Product Description

2-Way HydroSeal Valves

  • LifeSealsTM never need lubrication
  • Exclusive adjustable indicator plate for flow control
  • Flow tabs included for marking ports (English & Spanish)
  • Awarded the NSF International seal

Product Specifications

Inside Diameter:
1 1/2 in.
Valve:
2 Way
Top
Ask A Question

?     Asked on 11/11/2014by Inyo Visitor

Is my valve completely shot if the spa drains into pool after pump shuts off and the level rises up in pool till it hits the overflow level?
 Reply

A  Answered on 11/12/2014 by InyoPools Product Specialist Alex V.

It sounds like it may be the diverter gasket. In that case, you will need to replace the diverter assembly.
 Reply


?     Asked on 5/15/2017by Inyo Visitor

Is this an "open" and "closed" valve? I am looking for a valve to turn a water feature on and off....and what electronic actuator would I use with this valve...I have a Hayward Aquasalt system with external controls....I want to run this valve from my touch pad
 Reply

A  Answered on 5/16/2017 by InyoPools Product Specialist Lennox H.

Hi. This is an Open and Closed valve which can be controlled electronically by a Hayward GVA-24 Actuator.
 Reply


?     Asked on 6/8/2019by Ron McClure

Which direction does the valve go, inlet, outlet?
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Ron. Either port can be used as the inlet and the other the outlet. 
 Reply


?     Asked on 5/15/2021by Frank McGarry

Is this valve made by Jandy? Will this top component (where screws hold down) fit my current Jandy valve. My top part of valve (Jandy) is cracked and I want to just replace the top, cracked component. I cannot cut out the existing PVC
 Reply

A  Answered on 5/19/2021 by InyoPools Product Specialist Patrick P.

Hi Frank, This valve is made by CMP and replaces a Jandy valve. Unfortunately the parts from this valve will not fit into a Jandy valve.
 Reply


?     Asked on 6/5/2021by Carlin

Can this replace a Jandy #4715 2 port valve?

 Reply

A  Answered on 6/5/2021 by InyoPools Product Specialist Danny R.

Yes, this will behave the same as your Jandy 2 port valve.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
(50%) 2 of 4 customer would recommend this product to a friend.
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

Great valve. Much nicer than the ball-style valves. Unions make it easy to replace existing fittings and disassemble for future repairs.


Was this review helpful to you? 
 

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

I had been changing so many valves on my pool system that would freeze up. Now, thanks to these valves I bought from you I have not had any problems operating my pool. Thank you!


Was this review helpful to you? 
 

 (5 out of 5 stars)  Two way union valve

Reviewed By:  Thomas C. from Churchville,pa. ()

Pros: We'll built, quality valve that can be rebuilt

Cons: Handle position seems backwards

We'll built valves with full face rubber gaskets.The handle position is a little deceiving with handle across meaning open.


Was this review helpful to you? 
 

 (5 out of 5 stars)  great diverter valve

Reviewed By:  John W. from las vegas, nv ()

Cons: too bad they don't make it with female pipe thread. that could come in handy

At long last, a quality all plastic valve, that does not require lubricating and can be removed for service or reinstalled elsewhere if the plumbing is reconfigured.


Was this review helpful to you?